English
Maharashtra State BoardSSC (English Medium) 10th Standard

Revision: The Electric Spark Science and Technology 1 SSC (English Medium) 10th Standard Maharashtra State Board

Advertisements

Definitions [5]

Define fuse.

Electric fuse is a safety device which is used in household wiring and in many appliances.

Define the following:

Electrolyte

The solution through which the electricity passes is called an electrolyte.

Definition: Heating effect of electric current

When a resistor is connected in an electrical circuit, heat is produced in it due to the current. This is known as the heating effect of current.

Define Electric power.

Electric power (P) is the rate at which electrical energy is transferred or consumed in an electrical circuit.

Definition: Electric Power

In an electrical circuit, electric power is defined as the rate at which electrical energy is supplied by the source.

Formulae [2]

Write the mathematical expression for Joule’s law of heating.

The mathematical expression of Joule’s Law of heating is: H = I2 Rt

Where,

H = Produced Heat 
I = Current flowing through the device
t = Time taken
r = Resistance of the appliance

Formula: Electric Power

Electric Power P = \[\frac {W}{t}\] = VI = \[\frac {V^2}{R}\] = I2R

Key Points

Key Points: Electric Circuit
  • Electric energy from a cell is used to do work on charges, which is converted into heat in a resistor or other forms, like motion in a motor.
  • The work done (energy) in moving a charge Q across a potential difference VAB is:
    Work = VAB × Q
  • Heat produced (H) in a resistor over time t is given by Joule’s Law of Heating:
    H = I2 × R × t
  • According to Ohm’s Law:
    VAB = I × R
  • Electrical power (P) is the rate of energy transfer and is calculated as:
    P = VAB × I
    Its unit is watt (W), where 1W = 1 volt × 1 ampere.
Key Points: Series Combination of Resistors
  • In a series combination, the current has a single path, so the same current flows through each resistor.
  • The equivalent resistance in a series combination is equal to the sum of the individual resistances, i.e. Rs = R1 + R2 + R3 + ....
Key Points: Parallel Combination of Resistors
  • In a parallel combination, the potential difference across each resistor is the same as that across the terminals of the battery.
  • The total current in a parallel circuit is equal to the sum of the currents in the individual branches, and the equivalent resistance is less than the smallest resistance connected.
Key Points: Heating Effect of Electric Current
  • Heating Effect: Current through a resistor produces heat, calculated by H = I²Rt or H = VIt (Joule’s Law).
  • Heat Applications: Used in devices like irons, heaters, bulbs, and fuses (to stop excess current).
  • Power Unit: 1 kWh = 3.6 × 10⁶ J, called 1 unit of electrical energy in electricity bills.
  • Short Circuit & Fuse: A short circuit causes a large current; the fuse wire melts to break the circuit and prevent fire.
  • MCBs: Miniature Circuit Breakers automatically cut off power during overload or fault conditions.
Key Points: Electric Power
  • Electrical power represents the rate at which electrical energy is supplied by the source in an electric circuit.
  • The S.I. unit of electrical power is a watt (W), and larger units such as kilowatt, megawatt, and gigawatt are used for measuring higher power.

Important Questions [33]

Advertisements
Advertisements
Advertisements
Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×