Advertisements
Advertisements
Question
What does overloading cause?
Advertisements
Solution
Due to overloading, fuse wire melts and the supply gets shut down.
APPEARS IN
RELATED QUESTIONS
State four most common electrical appliances based on heating effect of electric current. Why do we use finely heated platinum wire in surgery?
Why is the tungsten used almost exclusively for filament of electric lamps?
How does the resistance of a wire vary with its area of cross-section?
Name any two effects of electric current.
The safety device based on the heating effect of electric current is called a ______.
An electric heater is connected to the 230 V mains supply. A current of 8 A flows through the heater.
(a) How much charge flows around the circuit each second?
An electric heater is connected to the 230 V mains supply. A current of 8 A flows through the heater.
(b) How much energy is transferred to the heater each second?
How does the resistance of a wire vary with its:
diameter?
Why is a series arrangement not used for connecting domestic electrical appliances in a circuit?
An electric kettle rated at 220 V, 2.2 kW, works for 3 hours. Find the energy consumed and the current drawn.
Why does the connecting cord of an electric heater not glow hot while the heating element does?
A heating coil has a resistance of 200 Ω. At what rate will heat be produced in it when a current of 2.5 A flows through it?
The current passing through an electric kettle has been doubled. The heat produced will become:
(a) half
(b) double
(c) four time
(d) one-fourth
The electrical resistivities of four materials P, Q, R and S are given below:
| P | `6.84xx10^8`Ωm |
| Q | `1.70xx10^8`Ωm |
| R | ` 1.0xx10^15`Ωm |
| s | `11.0xx10^-7`Ωm |
Which material will you use for making: (a) heating element of electric iron (b) connecting wires of electric iron (c) covering of connecting wires? Give reason for your choice in each case.
Which electric heating device in your home do you think have resistors which control the flow of electricity?
Give a scientific reason.
Tungsten metal is used to make a solenoid type coil in an electric bulb.
Identify the figure and give its use.
An electric iron of 1100 W is operated for 2 hrs daily. What will be the electrical consumption expenses for that in the month of April? (The electric company charges Rs 5 per unit of energy).
Write the mathematical expression for Joule’s law of heating.
In an electric bulb, coil of _______ metal is used.
The electricity bill specifies the usage in _______.
A coil of an alloy _______ is used in electric heater cooker as a resistor.
Write scientific reason.
A coil made up of alloy Nichrome is used in the electric heater cooker as a resistor.
Name any two appliances which works on the phenomenon of heating effect of electric current.
How can overloading be avoided?
An electric bulb is connected to a 220 V generator. The current is 0.50 A. What is the power of the bulb?
Unscramble the following words:
SFEU
Can we use the same fuse in a geyser and a television set? Explain.
Your teacher has shown you the following activity.
Activity: Teacher has wound a long insulated piece of wire around an iron nail in the form of a coil. Free ends of the wire are connected to a cell through a switch as shown in the following figure. The current is switched on and some pins are placed near the ends of the nail.
Write down any three questions that come to your mind about this activity.
______ wire is used in the filament of the bulbs.
Copper wire offers very little ______ and does not get heated up quickly.
What is a trip switch?
A trip switch is a ______ safety device.
If 220 V potential difference is applied across an electric bulb, a current of 0.45 A flows in the bulb. What must be the power of the bulb?
Find the odd one out.
1 kWh is equal to ______.
In the electric equipment producing heat like iron, electric heater, boiler, toaster etc., an alloy such as nichrome is used, not pure metals.
In a set up the students coated iron nails with zinc metal and noted that, iron nails coated with zinc prevents rusting. They also observed that zinc initially acts as a physical barrier, but an extra advantage of using zinc is that it continues to prevent rusting even if the layer of zinc is damaged. Name this process of rust prevention and give any two other methods to prevent rusting.
An electric iron is rated 220 V, 2 kW. If the iron is used for 3h daily find the cost of running it for one week if it costs ₹ 4.25 per kWh.
