PUC Science 2nd PUC Class 12 - Karnataka Board PUC Question Bank Solutions for Physics

The K_β X-ray of argon has a wavelength of 0.36 nm. The minimum energy needed to ionize an argon atom is 16 eV. Find the energy needed to knock out an electron from the K shell of an argon atom.

The K_β X-rays from certain elements are given below. Draw a Moseley-type plot of √v versus Z for K_β radiation.

An inductor-coil of resistance 10 Ω and inductance 120 mH is connected across a battery of emf 6 V and internal resistance 2 Ω. Find the charge which flows through the inductor in (a) 10 ms, (b) 20 ms and (c) 100 ms after the connections are made.

Find the maximum potential difference which may be applied across an X-ray tube with tungsten target without emitting any characteristic K or L X-ray. The energy levels of the tungsten atom with an electron knocked out are as follows.

An inductor-coil of inductance 17 mH is constructed from a copper wire of length 100 m and cross-sectional area 1 mm². Calculate the time constant of the circuit if this inductor is joined across an ideal battery. The resistivity of copper = 1.7 × 10⁻⁸ Ω-m.

The electric current in an X-ray tube (from the target to the filament) operating at 40 kV is 10 mA. Assume that on an average, 1% of the total kinetic energy of the electron hitting hte target are converted into X-rays.
(a) What is the total power emitted as X-rays and (b) how much heat is produced in the target every second?

An LR circuit having a time constant of 50 ms is connected with an ideal battery of emf ε. find the time elapsed before (a) the current reaches half its maximum value, (b) the power dissipated in heat reaches half its maximum value and (c) the magnetic field energy stored in the circuit reaches half its maximum value.

Heat at the rate of 200 W is produced in an X-ray tube operating at 20 kV. Find the current in the circuit. Assume that only a small fraction of the kinetic energy of electrons is converted into X-rays.

A coil having an inductance L and a resistance R is connected to a battery of emf ε. Find the time taken for the magnetic energy stored in the circuit to change from one fourth of the steady-state value to half of the steady-state value.

A solenoid having inductance 4.0 H and resistance 10 Ω is connected to a 4.0 V battery at t = 0. Find (a) the time constant, (b) the time elapsed before the current reaches 0.63 of its steady-state value, (c) the power delivered by the battery at this instant and (d) the power dissipated in Joule heating at this instant.

The wavelength of K_α X-ray of tungsten is 21.3 pm. It takes 11.3 keV to knock out an electron from the L shell of a tungsten atom. What should be the minimum accelerating voltage across an X-ray tube having tungsten target which allows production of K_α X-ray?

(Use Planck constant h = 6.63 × 10^-34 Js= 4.14 × 10^-15 eVs, speed of light c = 3 × 10⁸ m/s.)

The magnetic field at a point inside a 2.0 mH inductor-coil becomes 0.80 of its maximum value in 20 µs when the inductor is joined to a battery. Find the resistance of the circuit.

An LR circuit with emf ε is connected at t = 0. (a) Find the charge Q which flows through the battery during 0 to t. (b) Calculate the work done by the battery during this period. (c) Find the heat developed during this period. (d) Find the magnetic field energy stored in the circuit at time t. (e) Verify that the results in the three parts above are consistent with energy conservation.

A certain element emits K_α X-ray of energy 3.69 keV. Use the data from the previous problem to identify the element.

(Use Planck constant h = 6.63 × 10^-34 Js= 4.14 × 10^-15 eVs, speed of light c = 3 × 10⁸ m/s.)

An inductor of inductance 2.00 H is joined in series with a resistor of resistance 200 Ω and a battery of emf 2.00 V. At t = 10 ms, find (a) the current in the circuit, (b) the power delivered by the battery, (c) the power dissipated in heating the resistor and (d) the rate at which energy is being stored in magnetic field.

The K_α X-rays of aluminium (Z = 13) and zinc (Z = 30) have wavelengths 887 pm and 146 pm respectively. Use Moseley's  law √v = a(Z − b) to find the wavelengths of the K_α X-ray of iron (Z = 26).

(Use Planck constant h = 6.63 × 10^-34 Js= 4.14 × 10^-15 eVs, speed of light c = 3 × 10⁸ m/s.)

The K_α and K_β X-rays of molybdenum have wavelengths 0.71 A and 0.63 A respectively. Find the wavelength of L_α X-ray of molybdenum.

Two coils A and B have inductances 1.0 H and 2.0 H respectively. The resistance of each coil is 10 Ω. Each coil is connected to an ideal battery of emf 2.0 V at t = 0. Let i_A and i_Bbe the currents in the two circuit at time t. Find the ratio i_A / i_B at (a) t = 100 ms, (b) t = 200 ms and (c) t = 1 s.

The current in a discharging LR circuit without the battery drops from 2.0 A to 1.0 A in 0.10 s. (a) Find the time constant of the circuit. (b) If the inductance of the circuit 4.0 H, what is its resistance?

The K_α and K_β X-rays of molybdenum have wavelengths 0.71 A and 0.63 A respectively. Find the wavelength of L_α X-ray of molybdenum.

(Use Planck constant h = 6.63 × 10^-34 Js= 4.14 × 10^-15 eVs, speed of light c = 3 × 10⁸ m/s.)