English
Karnataka Board PUCPUC Science Class 11

The Magnetic Field at a Point Inside a 2.0 Mh Inductor-coil Becomes 0.80 of Its Maximum Value in 20 µS When the Inductor is Joined to a Battery. Find the Resistance of the Circuit. - Physics

Advertisements
Advertisements

Question

The magnetic field at a point inside a 2.0 mH inductor-coil becomes 0.80 of its maximum value in 20 µs when the inductor is joined to a battery. Find the resistance of the circuit.

Sum
Advertisements

Solution

Given:-

Inductance of the inductor, L = 2.0 mH

Let the resistance in the circuit be R and the steady state value of the current be i0.

At time t , current i in the LR circuit is given by

i = i0(1 − e−t)

Here,

\[\tau = \frac{L}{R}=\] Time constant

On multiplying both sides by µ0n, we get

n = Number of turns per unit length of the coil

µ0ni = µ0ni0(1 − et)

⇒ B = B0(1 − e−tR/L)

⇒ 0.8 B0 = B0

\[\left( 1 - e^\frac{- 20 \times {10}^{- 6} R}{2 \times {10}^{- 3}} \right)\]

⇒ 0.8 = (1 − e−R/100)

⇒ e−R/100 = 0.2

⇒ ln (eR/100) = ln (0.2)

`rArr -R/100=-1.693`

⇒ R = 169.3  Ω

shaalaa.com
  Is there an error in this question or solution?
Chapter 16: Electromagnetic Induction - Exercises [Page 312]

APPEARS IN

HC Verma Concepts of Physics Vol. 2 [English] Class 11 and 12
Chapter 16 Electromagnetic Induction
Exercises | Q 84 | Page 312

RELATED QUESTIONS

In a series LCR circuit connected to an a.c. source of voltage v = vmsinωt, use phasor diagram to derive an expression for the current in the circuit. Hence, obtain the expression for the power dissipated in the circuit. Show that power dissipated at resonance is maximum


The figure shows a series LCR circuit with L = 10.0 H, C = 40 μF, R = 60 Ω connected to a variable frequency 240 V source, calculate

(i) the angular frequency of the source which drives the circuit at resonance,

(ii) the current at the resonating frequency,

(iii) the rms potential drop across the inductor at resonance.


Show that in an a.c. circuit containing a pure inductor, the voltage is ahead of current by π/2 in phase ?


The time constant of an LR circuit is 40 ms. The circuit is connected at t = 0 and the steady-state current is found to be 2.0 A. Find the current at (a) t = 10 ms (b) t = 20 ms, (c) t = 100 ms and (d) t = 1 s.


A solenoid having inductance 4.0 H and resistance 10 Ω is connected to a 4.0 V battery at t = 0. Find (a) the time constant, (b) the time elapsed before the current reaches 0.63 of its steady-state value, (c) the power delivered by the battery at this instant and (d) the power dissipated in Joule heating at this instant.


An LR circuit with emf ε is connected at t = 0. (a) Find the charge Q which flows through the battery during 0 to t. (b) Calculate the work done by the battery during this period. (c) Find the heat developed during this period. (d) Find the magnetic field energy stored in the circuit at time t. (e) Verify that the results in the three parts above are consistent with energy conservation.


Two coils A and B have inductances 1.0 H and 2.0 H respectively. The resistance of each coil is 10 Ω. Each coil is connected to an ideal battery of emf 2.0 V at t = 0. Let iA and iBbe the currents in the two circuit at time t. Find the ratio iA / iB at (a) t = 100 ms, (b) t = 200 ms and (c) t = 1 s.


An ac circuit as shown in the figure has an inductor of inductance L and a resistor or resistance R  connected in series. Using the phasor diagram, explain why the voltage in the circuit will lead the  current in phase.


The potential difference across the resistor is 160V and that across the inductor is 120V. Find the  effective value of the applied voltage. If the effective current in the circuit be 1.0 A, calculate the total impedance of the circuit.


Use the expression for Lorentz force acting on the charge carriers of a conductor to obtain the expression for the induced emf across the conductor of length l moving with velocity v through a magnetic field B acting perpendicular to its length.


Figure shows a series LCR circuit connected to a variable frequency 230 V source. L = 5.0 H, C = 80 µF, R = 40 Ω.

  1. Determine the source frequency which drives the circuit in resonance.
  2. Obtain the impedance of the circuit and the amplitude of current at the resonating frequency.
  3. Determine the rms potential drops across the three elements of the circuit. Show that the potential drop across the LC combination is zero at the resonating frequency.

In LCR circuit if resistance increases quality factor ______.

The phase diffn b/w the current and voltage at resonance is


A series LCR circuit containing a 5.0 H inductor, 80 µF capacitors, and 40 Ω resistor is connected to a 230 V variable frequency ac source. The angular frequencies of the source at which power is transferred to the circuit are half the power at the resonant angular frequency are likely to be ______.


A series LCR circuit containing 5.0 H inductor, 80 µF capacitor and 40 Ω resistor is connected to 230 V variable frequency ac source. The angular frequencies of the source at which power transferred to the circuit is half the power at the resonant angular frequency are likely to be ______.


To reduce the resonant frequency in an LCR series circuit with a generator ______.


A coil of 0.01 henry inductance and 1 ohm resistance is connected to 200 volt, 50 Hz ac supply. Find the impedance of the circuit and time lag between max. alternating voltage and current.


A series LCR circuit containing a resistance of 120 Ω has angular resonance frequency 4 × 105 rad s-1. At resonance the voltage across resistance and inductance are 60 V and 40 V respectively. At what frequency the current in the circuit lags the voltage by 45°. Give answer in ______ × 105 rad s-1.


In a series LCR circuit, the inductance L is 10 mH, capacitance C is 1 µF and resistance R is 100Ω. The frequency at which resonance occurs is ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×