Advertisements
Advertisements
प्रश्न
With the help of labelled diagrams, describe an activity to find out the conditions under which iron rusts.
Advertisements
उत्तर

- In the initial test tube holding an iron nail, we introduced anhydrous calcium chloride and sealed its opening with a secure cork [see figure (a)]. Anhydrous calcium chloride is introduced to absorb moisture from the humid air in the test tube, thereby drying it. The iron nail in the initial test tube is maintained in an arid atmosphere devoid of water vapour. This test tube is set aside for approximately one week.
- In the second test tube containing an iron nail, we added boiled distilled water [see figure (b)]. Boiled water contains no dissolved air (or oxygen) because boiling removes it. An oil layer is applied over the boiled water in the test tube to prevent external air from interacting with it. The iron nail in the second test tube is maintained in an oxygen-free, boiling aqueous solution. The opening of this test tube is sealed with a cork, and it is set away for approximately one week.
- In the third test tube containing an iron nail, we added unboiled water to ensure that about two-thirds of the nail is submerged, with the remainder above the water and exposed to humid air [see figure (c)]. The iron nail in the third test tube has been simultaneously exposed to air and water. The orifice of this test tube is sealed with a cork, and it is set aside for approximately one week.
After one week, we observe the iron nails kept in all three test tubes, one by one. We find that:
- No rust is seen on the surface of an iron nail kept in dry air (water-free air) in the first test-tube [see figure (a)]. This tells us that rusting of iron does not take place in air alone.
- No rust is seen on the surface of the iron nail kept in air-free, boiled water in the second test-tube [see figure (b)]. This tells us that rusting of iron does not take place in water alone.
- Red-brown rust is observed on the surface of the iron nail placed in the third test tube containing both air and water [see figure (c)]. This indicates that iron rusts in the simultaneous presence of air and water.
The above experiment demonstrates that the rusting of iron requires both air (oxygen) and water (moisture). The rusting of iron objects can be prevented by keeping them dry.
APPEARS IN
संबंधित प्रश्न
Why do we apply paint on iron articles?
Explain why Iron sheets are coated with zinc during galvanization.
Explain the term “corrosion” with an example. Write a chemical equation to show the process of corrosion of iron.
In one method of rust prevention, the iron is not coated with anything. Which is this method?
The process of depositing a thin layer of zinc on iron articles is called ______.
Name five methods of preventing rusting of iron.
What are the constituents of stainless steel?
In stainless steel alloy, iron metal is mixed with ______.
Explain with reason:
Roasting is carried out on sulphide ores and not on carbonate ores.
Write scientific reasons.
Lemon or tamarind is used for cleaning copper vessels turned greenish.
Give reason.
An iron article should be given a coat of paint
Write a short note on Alloying.
Write the name.
Method used to present corrosion of copper.
Galvanisation is a method of protecting iron from rusting by coating it with a thin layer of ____________.
Copper objects lose their shine and form green coating of ____________.
Marble’s popularity began in ancient Rome and Greece, where white and off-white marble were used to construct a variety of structures, from hand-held sculptures to massive pillars and buildings.

The substance not likely to contain CaCO3 is:
A man painted his main gate made up of iron, to
- prevent it from rusting.
- protect it from sun.
- make it look beautiful.
- make it dust free.
Which of the above statement(s) is/are correct?
Galvanisation is a process used to prevent the rusting of which of the following?
Give an example of a chemical reaction for the following situation:
Sound is produced
