Advertisements
Advertisements
प्रश्न
Find the odd one out and give its explanation.
विकल्प
Temperature
Conduction
Convection
Radiation
Advertisements
उत्तर
Temperature
Explanation-
Temperature is a degree of hotness while conduction, convection, and radiation are modes of heat transfer.
APPEARS IN
संबंधित प्रश्न
Draw a schematic diagram of a circuit consisting of a battery of three cells of 2 V each, a 5 Ω resistor, an 8 Ω resistor, and a 12 Ω resistor, and a plug key, all connected in series.
Draw circuit symbols for
a cell
Draw circuit symbols for
an open switch
Draw circuit symbols for
A closed switch
What is a circuit diagram
Explain the construction and working of the following. Draw a neat diagram and label it.
Electric motor
How does the short circuit form? What is its effect?
Find the odd one out and justify it.
Fuse wire, M.C.B., Rubber Gloves, Generator
Two tungsten bulbs of power 50 W and 60 W work on 220 V potential difference. If they are connected in parallel, how much current will flow in the main conductor?
The following figure shows the symbols for components used in the accompanying electrical circuit. Place them at proper places and complete the circuit.
Which law can you prove with the help of above circuit?
What do you understand by the closed electric circuit
In any electric circuit, when the switch is on and the current flows through it why do the wire, switches, bulb or devices become hot?
If you touch an electric wire carrying current you get a shock, but if on the same wire the birds sit they do not get any shock/current. Explain why?
What is the potential difference?
Nowadays MCBs are used in homes, for stop the current in the circuit which suddenly increases.
______ is the device used to close or open an electric circuit.
The switch is used to close or open an electric circuit.
In the given circuit diagram, which of the given switch(s) should be closed. So that only bulb A glows.
Draw the circuit diagram for the series connection.
In the circuit diagram below, 10 units of electric charge move past point x every second What is the current in the circuit ______.
In the circuit shown, which switches (L,M or N) must be closed to light up the bulb?
Higher Order Question
A student made a circuit by using an electric cell, a switch, a torch bulb (fitted in the bulb holder), and copper connecting wires. When he turned on the switch, the torch bulb did not glow at all. The student checked the circuit and found that all the wire connections were tight.
- What could be the possible reason for the torch bulb not glowing even when the circuit appears to be complete?
Draw the circuit diagram for the following series connection
Study the three electric circuits below. Each of them has a glass rod (G), a steel rod (S), and a wooden rod (W).
In which of the electric circuits would the bulb not light up.
Three bulbs are connected end to end from the battery. This connection is called _______.
What is electric circuit?
State whether true or false. If false, correct the statement.
Ammeter is connected in parallel in any electric circuit.
When a circuit is open, _____ cannot pass through it.
A device that is used to break an electric circuit is called ______.
Instead of metal wires, a jute string can be used to make a circuit.
Assertion: In an open circuit, the current passes from one terminal of the electric cell to another.
Reason: Generally, the metal disc of a cell acts as a positive terminal.
In the following circuits (Figure), heat produced in the resistor or combination of resistors connected to a 12 V battery will be
 |
 |
 |
| (i) | (ii) | (iii) |
In an electric circuit, the current starts from ______.
Choose the statement which is not correct in the case of an electric fuse.
Observe the circuit given:
1. Would any of the bulbs glow when the switch is in the ‘OFF’ position?
2. What will be the order in which the bulbs A, B, and C will glow when the switch is moved to the ‘ON’ position?
In the above circuit, if the current reading in the ammeter A is 2A, what would be the value of R1?
