Advertisements
Advertisements
प्रश्न
Tell the odd one out. Give a proper explanation.
Find the odd one out and give its explanation.
विकल्प
Fuse wire
Bad conductor
Rubber gloves
Generator
Advertisements
उत्तर
Generator
Explanation:
Others restrict the flow of current while the generator produces it. This is because a generator’s primary function is to actively produce an electrical current. In contrast, the other three options (fuse wire, bad conductor, and rubber gloves) all function to restrict, break, or block the flow of electricity.
APPEARS IN
संबंधित प्रश्न
Redraw the circuit of question 1, putting in an ammeter to measure the current through the resistors and a voltmeter to measure the potential difference across the 12 Ω resistors. What would be the readings in the ammeter and the voltmeter?
What do the following symbols mean in circuit diagrams?
Draw circuit symbols for
A closed switch
A battery is to be formed by joining 3 dry cells with connecting wires. Show how will you connect the wires by drawing a diagram.
In an electric circuit, a battery and a bulb have been connected and the battery consists of two cells of equal potential difference. If the bulb is not glowing, then which tests will you perform in order to find out the reason for the bulb not glowing?
Distinguish between a closed circuit and an open circuit, with the use of suitable labelled diagrams.
Write the condition required for a circuit to be a closed circuit.
Match the column ‘A’ with column ‘B’.
|
Column ‘A’
|
Column ‘B’ |
|
(1) Eka - boron
|
(a) Germanium
|
|
(2) Eka - Aluminium
|
(b) Scandium
|
|
(3) Eka - Silicon
|
(c) Gallium |
Answer the following question.
With the help of a suitable circuit diagram prove that the reciprocal of the equivalent resistance of a group of resistances joined in parallel is equal to the sum of the reciprocals of the individual resistances.
What do you understand by the closed electric circuit
In any electric circuit, when the switch is on and the current flows through it why do the wire, switches, bulb or devices become hot?
How much is the potential difference between live and neutral wires?
Right or wrong sentence.
Increasing the current passing through the wire decreases the magnetic field intensity.
Nowadays MCBs are used in homes, for stop the current in the circuit which suddenly increases.
Write scientific reason.
It is beneficial to carry electrical energy in AC form as it is carried over long distances.
______ is the device used to close or open an electric circuit.
In the given circuit diagram, which of the given switch(s) should be closed. So that only bulb A glows.
Draw the circuit diagram for the series connection.
Rahul wants to make an electric circuit. He has a bulb, two wires, a safety pin, and a piece of copper. He does not have any electric cell or battery. Suddenly he gets some idea. He uses lemon instead of a battery and makes a circuit. Will the bulb glow?
In which among the following circuits does the bulb glow?
Study the electric circuit below. Which of the following switches should be closed so that only two bulbs will light up
Which of the following a simple circuit must-have?
Assertion: People struck by lightning receive a severe electrical shock.
Reason: Lightning carries very high voltage.
In a simple circuit, why does the bulb glow when you close the switch?
Explain about domestic electric circuits. (circuit diagram not required)
What are the types of electric circuits?
A child has drawn the electric circuit to study Ohm’s law as shown in Figure. His teacher told that the circuit diagram needs correction. Study the circuit diagram and redraw it after making all corrections.
Our body is a ______ of electricity.
Observe the circuit given:
1. Would any of the bulbs glow when the switch is in the ‘OFF’ position?
2. What will be the order in which the bulbs A, B, and C will glow when the switch is moved to the ‘ON’ position?
In the above circuit, if the current reading in the ammeter A is 2A, what would be the value of R1?
Match the following
| 1. | Insulator | a. | Coulomb |
| 2. | Conductor | b. | Electric circuit |
| 3. | Closed path | c. | Copper |
| 4. | Electric charge | d. | Rubber |
What are the essential components of an electric circuit?
Paheli is running short of connecting wires. To complete an electric circuit, she may use a ______.
Write a short note on the different electrical circuits.
A complete circuit is left on for several minutes, causing the connecting copper wire to become hot. As the temperature of the wire increases, the electrical resistance of the wire
Set up the circuit shown in Figure again. Move the key to ‘ON’ position and watch carefully in which direction the compass needle gets deflected. Switch ‘OFF’ the current. Now keeping rest of the circuit intact, reverse the connections at the terminal of the cell. Again switch ‘on’ the current. Note the direction in which the needle gets deflected. Think of an explanation.
