Advertisements
Advertisements
प्रश्न
Draw a circuit diagram of an electric circuit containing a cell, a key, an ammeter, a resistor of 2 Ω in series with a combination of two resistors (4 Ω each) in parallel and a voltmeter across the parallel combination. Will the potential difference across the 2 Ω resistor be the same as that across the parallel combination of 4 Ω resistors? Give reason.
Advertisements
उत्तर
Yes, the potential difference across the 2 Ω resistor will be the same as that across the parallel combination of 4 Ω resistors because net resistance of parallel combination
= `(4 xx 4)/(4 + 4)`
= 2 Ω
and current across 2 Ω and parallel combination is the same.
APPEARS IN
संबंधित प्रश्न
Redraw the circuit of question 1, putting in an ammeter to measure the current through the resistors and a voltmeter to measure the potential difference across the 12 Ω resistors. What would be the readings in the ammeter and the voltmeter?
A battery is to be formed by joining 3 dry cells with connecting wires. Show how will you connect the wires by drawing a diagram.
Match the column ‘A’ with column ‘B’.
|
Column ‘A’
|
Column ‘B’ |
|
(1) Eka - boron
|
(a) Germanium
|
|
(2) Eka - Aluminium
|
(b) Scandium
|
|
(3) Eka - Silicon
|
(c) Gallium |
Draw a neat diagram showing a open electric circuit.
Explain the following:
Closed circuit
In the given circuit diagram, which of the given switch(s) should be closed. So that only bulb A glows.
Rahul wants to make an electric circuit. He has a bulb, two wires, a safety pin, and a piece of copper. He does not have any electric cell or battery. Suddenly he gets some idea. He uses lemon instead of a battery and makes a circuit. Will the bulb glow?
Study the electric circuit below. Which of the following switches should be closed so that only two bulbs will light up
Study the three electric circuits below. Each of them has a glass rod (G), a steel rod (S), and a wooden rod (W).
In which of the electric circuits would the bulb not light up.
_____ has a thin metallic filament that melts and breaks the connection when the circuit is overheated.
When a circuit is open, _____ cannot pass through it.
A device that is used to break an electric circuit is called ______.
The rate of flow of electric charges in a circuit is called ______.
Paheli connected two bulbs to a cell as shown in the following figure.
She found that filament of bulb B is broken. Will the bulb A glow in this circuit? Give reason.
Overloading of electric circuits can lead to short-circuiting.
How is Joule's law effect useful in electric circuits where fuse is used as a safety device?
Assertion: People struck by lightning receive a severe electrical shock.
Reason: Lightning carries very high voltage.
