Advertisements
Advertisements
प्रश्न
What do the following symbols mean in circuit diagrams?
Advertisements
उत्तर
Variable resistance or rheostat. A rheostat is used to change the resistance in a circuit.
APPEARS IN
संबंधित प्रश्न
Draw a circuit diagram to show how 3 bulbs can be lit from a battery so that 2 bulbs are controlled by the same switch the third bulb has its own switch.
In an electric circuit, electron flow a from of point of ______ potential to the point of ______ potential.
Match the column ‘A’ with column ‘B’.
|
Column ‘A’
|
Column ‘B’ |
|
(1) Eka - boron
|
(a) Germanium
|
|
(2) Eka - Aluminium
|
(b) Scandium
|
|
(3) Eka - Silicon
|
(c) Gallium |
Write scientific reason.
It is beneficial to carry electrical energy in AC form as it is carried over long distances.
Study the electric circuit below. Which of the following switches should be closed so that only two bulbs will light up
Study the three electric circuits below. Each of them has a glass rod (G), a steel rod (S), and a wooden rod (W).
In which of the electric circuits would the bulb not light up.
_____ has a thin metallic filament that melts and breaks the connection when the circuit is overheated.
Three bulbs are connected end to end from the battery. This connection is called _______.
What is electric circuit?
In a simple circuit, why does the bulb glow when you close the switch?
When a circuit is open, _____ cannot pass through it.
The rate of flow of electric charges in a circuit is called ______.
What are the types of electric circuits?
In an electrical circuit three incandescent bulbs A, B and C of rating 40 W, 60 W and 100 W respectively are connected in parallel to an electric source. Which of the following is likely to happen regarding their brightness?
In an electric circuit, the current starts from ______.
Observe the circuit given:
1. Would any of the bulbs glow when the switch is in the ‘OFF’ position?
2. What will be the order in which the bulbs A, B, and C will glow when the switch is moved to the ‘ON’ position?
In the above circuit, if the current reading in the ammeter A is 2A, what would be the value of R1?
Write a short note on the different electrical circuits.
A complete circuit is left on for several minutes, causing the connecting copper wire to become hot. As the temperature of the wire increases, the electrical resistance of the wire
