Advertisements
Advertisements
प्रश्न
Explain self induction and mutual induction
Advertisements
उत्तर
Derivation of induced e.m.f due to self induction:
a. Consider a coil connected with battery E, plug key K and inductor L carrying current of magnitude I as shown in figure.
b. Since magnetic flux linked with the coil is directly proportional to the current.
`phi prop I`
`phi prop LI`...................(1)
where, L = constant called coefficient of self induction or self inductance of the coil, which depends upon the material of the core, number of turns, shape and area of the coil
c. Induced e.m.f in the coil is given by,
`e=-(dphi)/dt`
`e=-L(dI)/dt`.....................(2)
-ve sign in equation (ii) shows that self induced e.m.f opposes the rate of change of current.
`|e|=|-L(dI)/dt|=L(dI)/dt`
therefore Magnitude of self induced e.m.f is given by, |e|=L(dI)/dt
This is required induced e.m.f.
Derivation of induced e.m.f. due to mutual induction:
a. Consider primary coil P and secondary coil S fitted with galvanometer G are placed very close to each other as shown in figure. The coil P is connected in series with the source of e.m.f (battery) and key K.
b. When tap key K is pressed current IP passes through the coil P. Magnetic flux `phi_S` linked with secondary coil S at any instant is directly proportional to current IP through primary coil P at that instant.
`phi_s prop I_p`
`phi_s=MI_p`........................(1)
where M is constant called coefficient of mutual induction or mutual inductance of the
coil.
e.m.f induced in S at any instant is given by,` e_s=-(dphi_s)/dt`
`=-d/dt(MI_p)`
`e_s=-M(dI_p)/dt`
Magnitude of induced e.m.f is given by,
`|e_s|=-|M(dI_p)/dt|=(MdI_p)/dt`
`M=e_s/((dI_p)/dt)`
APPEARS IN
संबंधित प्रश्न
Explain the meaning of the term mutual inductance.
Define mutual inductance.
A long solenoid with 15 turns per cm has a small loop of area 2.0 cm2 placed inside the solenoid normal to its axis. If the current carried by the solenoid changes steadily from 2.0 A to 4.0 A in 0.1 s, what is the induced emf in the loop while the current is changing?
An air-cored solenoid with length 30 cm, area of cross-section 25 cm2 and number of turns 500, carries a current of 2.5 A. The current is suddenly switched off in a brief time of 10−3 s. How much is the average back emf induced across the ends of the open switch in the circuit? Ignore the variation in magnetic field near the ends of the solenoid.
Explain the phenomenon of mutual induction.
A pair of adjacent coils has a mutual inductance of 1.5 H. If the current in one coil changes from 0 to 20 A in 0.5 s, what is the change of flux linkage with the other coil?
Consider two concentric circular coils, one of radius r1 and the other of radius r2 (r1 < r2) placed coaxially with centers coinciding with each other. Obtain the expression for the mutual inductance of the arrangement.
A coil of self-inductance 2.5H and resistance 20Ω is connected to a battery of emf 120V having the internal resistance of 5 n. Find:
1) The time constant of the circuit.
2) The current in the circuit in steady state
A solenoid of length 20 cm, area of cross-section 4.0 cm2 and having 4000 turns is placed inside another solenoid of 2000 turns having a cross-sectional area 8.0 cm2 and length 10 cm. Find the mutual inductance between the solenoids.
A pair of adjacent coils has a mutual inductance of 1.5 H. If the current in one coil changes from 0 to 10 A in 0.2 s, what is the change of flux linkage with the other coil?
An emf of 96.0 mV is induced in the windings of a coil when the current in a nearby coil is increasing at the rate of 1.20 A/s. What is the mutual inductance (M) of the two coils?
Define mutual inductance.
In mutual induction, the main current remains same because ____________.
In an induction coil, the coefficient of mutual inductance is 6 henry. If a current of 10 ampere in the primary coil is cut-off in `1/1500"s"`, the e.m.f. at the terminals of the secondary coil will be ____________.
An alternating current of frequency 200 rad/s and peak value 1 A is applied to the primary of a transformer. If the coefficient of mutual induction between the primary and the secondary is 1.5H, then the voltage induced in the secondary will be approximately (π = 2217)
Two different wire loops are concentric and lie in the same plane. The current in the outer loop (I) is clockwise and increases with time. The induced current in the inner loop.
Alternating current of peak value `(2/pi)` ampere flows through the primary coil of transformer. The coefficient of mutual inductance between primary and secondary coil is 1 H. The peak e.m.f. induced in secondary coil is ______. (Frequency of a.c. = 50 Hz)
The mutual inductance between two coplanar concentric rings A and B of radii 'R1' and 'R2' placed in air when a current 'I' flows through ring A is (R1 >> R2) (µ0 = permeability of free space) ____________.
Two coils P and Q have mutual inductance 'M' H. If the current in the primary is I = I0 sin `omega`t, then the maximum vlaue of e.m.f. indued in coil Q is ____________.
The mutual inductance between two coils is 0.09 henry. If the current in the primary coil changes from 0 to 20 A in 0.006 s, the e.m.f. induced in the secondary coil at that instant is ____________.
The coefficient of mutual inductance is 2H and induced e.m.f. across secondary is 2 kV. Current in the primary is reduced from 6 A and 3A. The time required for the change of current is ____________.
A solenoid is connected to a battery so that a steady current flows through it. If an iron core is inserted into the solenoid, the current will ______.
Two conducting circular loops of radii R1 and R2 are placed in the same plane with their centres coinciding. If R1 >> R2, the mutual inductance M between them will be directly proportional to ______.
The mutual inductance M12 of coil 1 with respect to coil 2 ______.
- increases when they are brought nearer.
- depends on the current passing through the coils.
- increases when one of them is rotated about an axis.
- is the same as M21 of coil 2 with respect to coil 1.
An emf of 91 mV is induced in the windings of a coil when the current in o nearby coil is increasing at the rate of 1.3 A/s. what is the mutual inductance (M) of the two coils in mH?
A plane loop is shaped in the form as shown in figure with radii a = 20 cm and b = 10 cm and is placed in a uniform time varying magnetic field B = B0 sin ωt, where B0 = 10 mT and ω = 100 rad/s. The amplitude of the current induced in the loop if its resistance per unit length is equal to 50 × 10-3 Ω/m. The inductance of the loop is negligible is ______ A.
State and define the SI unit of mutual inductance.
The coefficient of mutual induction is 2 H and induced e.m.f. across secondary is 2 kV. Current in the primary is reduced from 6 A to 3 A. The time required for the change of current is ______.
The mutual inductance between a primary and secondary circuit is 0.4 H and the resistance in these circuits are \[20\Omega\] and \[4\Omega\] respectively. To produce a current of 0.5 A in the secondary, current in the primary must be changed at the rate of ______.
Two coils are placed close to each other. The mutual inductance of the pair of coils depends upon ______.
The value of mutual inductance of two coils is 6 mH. The current in one of the coil changes from 6 A to 1 A in 0.2 second so that e.m.f. is induced in the other coil. If the resistance of the coil is 6 Ω, the value of induced charge passing through the coil is ______.
What is the coefficient of coupling (K ) between two coils?
Which formula relates mutual inductance, coefficient of coupling, and the self-inductances of coil 1 and coil 2?
What maximum value of \[M\] follows from \[M=K\sqrt{L_1L_2}\] and \[0\leq K\leq 1\] ?
What is the SI unit of mutual inductance?
Which dimensional formula applies to mutual inductance?
Which pair gives other units of mutual inductance?
The Henry, the SI unit of mutual inductance, is named after whom?
Which equivalence correctly states the value of \[1\ \mathrm{H}\] ?
What does the Reciprocity Theorem of Mutual Inductance state?
What is the effect of a larger cross-sectional area of the coils on mutual inductance?
What happens to mutual inductance as the distance between coils increases?
What is the total flux linkage of secondary solenoid \[S_2\] ?
Why can \[B_2\] be assumed uniform across the entire area of the inner coil?
Which definition relates the flux through the inner coil to the current in the outer coil?
How does wireless charging use mutual inductance?
How does an induction cooktop use mutual inductance?
