Advertisements
Advertisements
प्रश्न
Explain the phenomenon of mutual induction.
Advertisements
उत्तर
a. The phenomenon of production of induced e.m.f in one coil due to change of current in the neighbouring coil is called mutual induction. The e.m.f so induced is called mutually induced e.m.f.
b.
Consider primary coil P and secondary coil S fitted with galvanometer G and placed very close to each other as shown in figure. The coil P is connected in series with the source of e.m.f (battery) and key K.
c. When tap key K is pressed, current IP passes through the coil P. Magnetic flux φS linked with secondary coil S at any instant is directly proportional to current IP through primary coil P at that instant.
∴ φS ∝ IP
∴ φS = M IP ….(i)
where M is constant called coefficient of mutual induction or mutual inductance of the coil.
d. e.m.f induced in S at any instant is given by,
`e_S = -(dphi_s)/(dt)`
`e_S=-d/(dt)(MI_P)` [From equation (i)]
∴ ` e_S = − M (dI_P)/dt`
∴ Magnitude of induced e.m.f is given by,
`|e_S|=|-(MdI_P)/dt|`
`e_s=(MdI_P)/dt`
`M=e_S/((dI_P)/dt)`
APPEARS IN
संबंधित प्रश्न
If the radius of a sphere is doubled without changing the charge on it, then electric flux originating from the sphere is ______.
Draw a necessary arrangement for winding of primary and secondary coils in a step-up transformer. State its underlying principle and derive the relation between the primary and secondary voltages in terms of number of primary and secondary turns. Mention the two basic assumptions used in obtaining the above relation.
Define mutual inductance.
In an experiment, two coils c1 and c2 are placed close to each other. Find out the expression for the emf induced in the coil c1 due to a change in the current through the coil c2.
A long solenoid with 15 turns per cm has a small loop of area 2.0 cm2 placed inside the solenoid normal to its axis. If the current carried by the solenoid changes steadily from 2.0 A to 4.0 A in 0.1 s, what is the induced emf in the loop while the current is changing?
A 1.0 m long metallic rod is rotated with an angular frequency of 400 rad s−1 about an axis normal to the rod passing through its one end. The other end of the rod is in contact with a circular metallic ring. A constant and uniform magnetic field of 0.5 T parallel to the axis exists everywhere. Calculate the emf developed between the centre and the ring.
An air-cored solenoid with length 30 cm, area of cross-section 25 cm2 and number of turns 500, carries a current of 2.5 A. The current is suddenly switched off in a brief time of 10−3 s. How much is the average back emf induced across the ends of the open switch in the circuit? Ignore the variation in magnetic field near the ends of the solenoid.
A pair of adjacent coils has a mutual inductance of 1.5 H. If the current in one coil changes from 0 to 20 A in 0.5 s, what is the change of flux linkage with the other coil?
Find the mutual inductance between the straight wire and the square loop of figure.
Find the mutual inductance between the circular coil and the loop shown in figure.
The current in a long solenoid of radius R and having n turns per unit length is given by i= i0 sin ωt. A coil having N turns is wound around it near the centre. Find (a) the induced emf in the coil and (b) the mutual inductance between the solenoid ant the coil.
A solenoid of length 20 cm, area of cross-section 4.0 cm2 and having 4000 turns is placed inside another solenoid of 2000 turns having a cross-sectional area 8.0 cm2 and length 10 cm. Find the mutual inductance between the solenoids.
A long solenoid of length l, cross-sectional area A and having N1 turns (primary coil), has a small coil of N2 turns (secondary coil) wound about its center. Determine the Mutual inductance (M) of the two coils.
A pair of the adjacent coil has a mutual inductance of 1.5 H. If the current in one coil varies from 0 to 20 A in 0.5 s, what is the change of flux linked with the other coil.
A coil of radius 'r' is placed on another coil (whose radius is 'R' and current flowing through it is changing) so that their centres coincide. (R>>r) if both the coils are coplanar then the mutual inductance between them is proportional to ______.
Two different wire loops are concentric and lie in the same plane. The current in the outer loop (I) is clockwise and increases with time. The induced current in the inner loop.
The coefficient of mutual inductance is 2H and induced e.m.f. across secondary is 2 kV. Current in the primary is reduced from 6 A and 3A. The time required for the change of current is ____________.
If number of turns in primary and secondary coils is increased to two times each, the mutual inductance ______.
Two coils are placed close to each other. The mutual inductance of the pair of coils depends upon the ______.
Two circular coils have their centres at the same point. The mutual inductance between them will be maximum when their axes ______
Two conducting circular loops of radii R1 and R2 are placed in the same plane with their centres coinciding. If R1 > > R2, the mutual inductance M between them will be directly proportional to ______.
Two conducting circular loops of radii R1 and R2 are placed in the same plane with their centres coinciding. If R1 >> R2, the mutual inductance M between them will be directly proportional to ______.
There are two coils A and B seperated by some distance. If a current of 2A flows through A, a magnetic flux of 10-2 Wb passes through B (no current through B). If no current passes through A and a current of 1A passes through B, what is the flux through A?
A toroid is a long coil of wire wound over a circular core. The major radius and cross-sectional radius of the toroid are R and r, respectively. The coefficient of mutual induction of the toroid is ______.
(The magnetic field in it is uniform, N = number of turns, R >> r, μ0 = permeability of free space)
Two circular loops, one of small radius r and the other of larger radius R, such that R >> r, are placed coaxially with centres coinciding. Obtain the mutual inductance of the arrangement.
State and define the SI unit of mutual inductance.
The coefficient of mutual induction is 2 H and induced e.m.f. across secondary is 2 kV. Current in the primary is reduced from 6 A to 3 A. The time required for the change of current is ______.
Two coils are placed close to each other. The mutual inductance of the pair of coils depends upon ______.
The value of mutual inductance of two coils is 6 mH. The current in one of the coil changes from 6 A to 1 A in 0.2 second so that e.m.f. is induced in the other coil. If the resistance of the coil is 6 Ω, the value of induced charge passing through the coil is ______.
What is the coefficient of coupling (K ) between two coils?
Which formula relates mutual inductance, coefficient of coupling, and the self-inductances of coil 1 and coil 2?
What maximum value of \[M\] follows from \[M=K\sqrt{L_1L_2}\] and \[0\leq K\leq 1\] ?
What is the effect of a larger cross-sectional area of the coils on mutual inductance?
What happens to mutual inductance as the distance between coils increases?
Why can \[B_2\] be assumed uniform across the entire area of the inner coil?
What is the magnetic flux through the inner small coil when current \[I_2\] flows in the outer large coil?
What is the mutual inductance of a small circular coil of radius \[r_1\] at the centre of a large circular coil of radius \[r_2\] when \[r_1\ll r_2\] ?
How does wireless charging use mutual inductance?
How does an induction cooktop use mutual inductance?
