Advertisements
Advertisements
प्रश्न
In an experiment, two coils c1 and c2 are placed close to each other. Find out the expression for the emf induced in the coil c1 due to a change in the current through the coil c2.
Advertisements
उत्तर
Suppose that a current I is flowing through the coil c2 at any instant. Flux linked with the coil c1 is given by
Φ ∝ I
Φ = MI ….. (i)
Where M is called coefficient of mutual induction
If ‘e’ is the induced emf produced in the coil c1, then
`e=(dphi)/dt=-d/(dt)(MI)=-M(dI)/dt`
APPEARS IN
संबंधित प्रश्न
The co-efficient of mutual induction between primary and secondary coil is 2H. Calculate induced e.m.f. if current of 4A is cut off in 2.5 x 10-4 seconds
A pair of adjacent coils has a mutual inductance of 1.5 H. If the current in one coil changes from 0 to 20 A in 0.5 s, what is the change of flux linkage with the other coil?
Consider two concentric circular coils, one of radius r1 and the other of radius r2 (r1 < r2) placed coaxially with centers coinciding with each other. Obtain the expression for the mutual inductance of the arrangement.
Find the mutual inductance between the circular coil and the loop shown in figure.
The current in a long solenoid of radius R and having n turns per unit length is given by i= i0 sin ωt. A coil having N turns is wound around it near the centre. Find (a) the induced emf in the coil and (b) the mutual inductance between the solenoid ant the coil.
A long solenoid of length l, cross-sectional area A and having N1 turns (primary coil), has a small coil of N2 turns (secondary coil) wound about its center. Determine the Mutual inductance (M) of the two coils.
The mutual inductance of a pair of adjacent coils is 1.5 H. If the current is one coil changes from 5 A to 10 A in 0.1 s, the rate of change of magnet flux linkage is ______.
Two coils having self inductances L1 = 75 mH and L2 = 55 mH are coupled with each other. The coefficient of coupling (K) is 0. 75. Calculate the mutual inductance (M) of the two coils
What does the coupling factor \[K\] quantify?
Why can \[B_2\] be assumed uniform across the entire area of the inner coil?
