Advertisements
Advertisements
प्रश्न
Complete the following :-
(a)
Advertisements
उत्तर
(a)
The equivalent resistance is Rs = 12Ω + 2.5Ω + 2.5Ω = 17Ω
APPEARS IN
संबंधित प्रश्न
In series combination which remains constant?
(a) Voltage
(b) Current
(c) Both current and voltage
(d) Both are variables
Find the expression for the resistors connected in series and write the two characteristics of it. (Draw figure).
An electrical appliance has a resistance of 25 Ω. When this electrical appliance is connected to a 230 V supply line, the current passing through it will be:
(a) 0.92 A
(b) 2.9 A
(c) 9.2 A
(d) 92 A
If five resistances, each of value 0.2 ohm, are connected in series, what will be the resultant resistance?
A p.d. of 4 V is applied to two resistors of 6 Ω and 2 Ω connected in series. Calculate:
(a) the combined resistance
(b) the current flowing
(c) the p.d. across the 6 Ω resistor
What potential difference is needed to drive a current o f 1 A through a 5 Ω resistor?
What do you mean by power rating of an electrical appliance? How do you use it to calculate
(a) the resistance of the appliance and
(b) the safe limit of the current in it, while in use?
Choose the correct alternative and rewrite the following:
You are given three equal resistances. In how many combinations can they are arranged?
Write an expression for the resistance of a conducting wire in terms of its length and area of cross-section.
The voltage applied to a given rheostat is made four times its initial value. By what factor will be resistance of the rheostat change?
Illustrate-combination of cells e.g., three cells, in series, explaining the combination briefly. Obtain an expression for current ‘i’ in the combination.
What should be the length of a nickel wire of area of cross-section 3 mm2 used for making a rheostat of 750 ohm? (ρ of nickle = 0.069 Ohm mm2/m)
Calculate the quantity of heat that will be produced in a coil of resistance 75 Ω if a current of 2A is passed through it for 2 minutes.
Two wires of the same length and area made of two materials of resistivity ρ1 and ρ2 are connected in series to a source of potential V. The equivalent resistivity for the same area is:
If R1 and R2 be the resistance of the filament of 40 W and 60 W respectively operating 220 V, then:
What is the maximum resistance which can be made using five resistors each of `1/5` W?
Show how you would connect three resistors, each of resistance 6 Ω, so that the combination has a resistance of 4 Ω.
