Advertisements
Advertisements
Questions
Define β
Define the current gain βDC for a transistor.
Advertisements
Solution
The dc common-emitter current ratio or current gain (βdc) is defined as the ratio of the collector current (IC) to base current (IB).
`beta_"dc" = "I"_"C"/"I"_"B"`
RELATED QUESTIONS
Why are the emitter, the base, and the collector of a BJT doped differently?
Draw the circuit symbol of the PNP transistor.
With the help of a neat diagram, explain the working of the npn transistor?
The light emitted in an LED is due to
The output of the following circuit is 1 when the input ABC is
Explain the current flow in an NPN transistor.
Explain the need for a feedback circuit in a transistor oscillator.
Assuming VCEsat = 0.2 V and β = 50, find the minimum base current (IB) required to drive the transistor given in the figure to saturation.
A transistor of α = 0.99 and VBE = 0.7 V is connected in the common-emitter configuration as shown in the figure. If the transistor is in the saturation region, find the value of collector current.
In the circuit shown in the figure, the BJT has a current gain (β) of 50. For an emitter-base voltage VEB = 600 mV, calculate the emitter-collector voltage VEC (in volts).
A transistor has a voltage gain A. If the amount βA of its output is applied to the input of the transistor, then the transistor becomes oscillator, when ______.
A common emitter amplifier is designed with n-p-n transistor (α = 0.99). The input impedance is 1 kΩ and the load is 10 kΩ. The voltage gain will be ______
A transistor having α = 0.8 is connected in common emitter configuration. When the base current changes by 6 mA, then the change in collector current is ______.
Least doped region in a transistor ____________.
Which of the following regions of a transistors are, respectively, heavily dopped and lightly dopped?
In a common emitter amplifier circuit using an n-p-n transistor, the phase difference between the input and the output voltages will be: ____________.
In a transistor, doping level in base is increased slightly, the collector current and base current respectively ______.
In common emitter mode of transistor, the d.c. current gain is 20, the emitter current is 7 mA. The collector current is ______.
A conducting wire has length 'L1' and diameter 'd1'. After stretching the same wire length becomes 'L2' and diameter 'd2' The ratio of resistances before and after stretching is ______.
The base current in common emitter mode of the transistor changes by 10 µA. If the current gain of the transistor is 50, then change in collector current is ______.
The current amplification factor for a transistor in its common emitter mode is 50. The current amplification factor in the common base mode of the transistor is ______.
Explain the working of the n-p-n transistor in a common base configuration.
Define peak value of alternating signal.
Define α.
In the case of constants ‘α’ and ‘β’ of a transistor ______.
