मराठी
महाराष्ट्र राज्य शिक्षण मंडळएचएससी विज्ञान (सामान्य) इयत्ता १२ वी

Define β

Advertisements
Advertisements

प्रश्न

Define β

Define the current gain βDC for a transistor.

व्याख्या
Advertisements

उत्तर

The dc common-emitter current ratio or current gain (βdc) is defined as the ratio of the collector current (IC) to base current (IB).

`beta_"dc" = "I"_"C"/"I"_"B"`

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 16: Semiconductor Devices - Exercises [पृष्ठ ३६४]

APPEARS IN

बालभारती Physics [English] Standard 12 Maharashtra State Board
पाठ 16 Semiconductor Devices
Exercises | Q 17 ii | पृष्ठ ३६४

संबंधित प्रश्‍न

Why is the base of a transistor made thin and is lightly doped?


Why are the emitter, the base, and the collector of a BJT doped differently?


Which method of biasing is used for operating a transistor as an amplifier?


For a transistor IC = 15 mA, IB = 0.5 mA. What is the current amplification factor?  


Explain the working of the PNP transistor? 


The principle based on which a solar cell operates is ____________.


The light emitted in an LED is due to


What is rectification?


Sketch the static characteristics of a common emitter transistor and bring out the essential features of input and output characteristics.


Assuming VCEsat = 0.2 V and β = 50, find the minimum base current (IB) required to drive the transistor given in the figure to saturation.


A common emitter amplifier is designed with n-p-n transistor (α = 0.99). The input impedance is 1 kΩ and the load is 10 kΩ. The voltage gain will be ______


For a transistor, the current ratio 'βdc' is defined as the ratio of ______.


In the study of transistor as an amplifier, the ratio of collector current to emitter current is 0.98 then the ratio of collector current to base current will be ______.


In an npn transistor, the base current is 100 µA and the collector current is 10 mA. The emitter current is ______.


In an npn transistor, the collector current is 24 mA. If 80% of electrons reach collector, its base current in mA is ______.


In a common emitter amplifier circuit using an n-p-n transistor, the phase difference between the input and the output voltages will be: ____________.


In an npn transistor circuit, the collector current is 10 mA. If 90% of the electrons emitted reach the collector, the emitter current (IE) and base current (IB) are given by ____________.


For a common emitter configuration, if 'α' and 'β' have their usual meanings, the correct relationship between 'α' and 'β' is ______.


A pnp transistor is used in common-emitter mode. If a change of 40 µA in base current brings a change of 2 µA in collector current with 0.04 V in base-emitter voltage, then the input resistance is ____________.


In common emitter amplifier, a change of 0.2 mA in the base current causes a change of 5 mA in the collector current. If input resistance is 2K `Omega` and voltage gain is 75, the load resistance used in the circuit is ______.


In a study of transistor as an amplifier, the ratio of collector current to emitter current is 0.98. The collector current is 3mA, then base current will be approximately ______.


In the common-emitter configuration of a transistor, the current gain is more than 1 because [lb, le, and lc are base, emitter, and collector currents respectively] ______


A common emitter amplifier has a voltage gain of 50, an input impedance of 100Ω and an output impedance of 2000Ω. The power gain of the amplifier is ______.


A conducting wire has length 'L1' and diameter 'd1'. After stretching the same wire length becomes 'L2' and diameter 'd2' The ratio of resistances before and after stretching is ______.


Define peak value of alternating signal.


Explain the output characteristics of common emitter configuration of n-p-n transistor.


When an n-p-n junction transistor is used as an amplifier in common emitter mode, ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×