Advertisements
Advertisements
प्रश्न
The common-base DC current gain of a transistor is 0.967. If the emitter current is 10mA. What is the value of base current?
Advertisements
उत्तर
Given:
Current gain (α) = 0.967
Emitter current = 10mA
To Find:
The value of base current of the transistor =?
Solution:
- The common gain DC current us is given by
α = 0.967 = `"I"_"C"/"I"_"E"="I"_"C"/10`
IC = 0.967 × 10
IC = 9.67mA - The base current of the transistor is given by the formula
IE = IB + IC
10 = IB + 9.67
IB = 0.33mA
The value of base current of the transistor is 0.33mA
संबंधित प्रश्न
In a BJT, the largest current flow occurs ______.
Why are the emitter, the base, and the collector of a BJT doped differently?
Derive the relation between α and β.
In a transistor amplifier, IC = 5.5 mA , IE = 5.6 mA. The current amplification factor β is ______
Draw the circuit symbol of the PNP transistor.
For a transistor IC = 15 mA, IB = 0.5 mA. What is the current amplification factor?
With the help of a neat diagram, explain the working of the npn transistor?
What is rectification?
Transistor functions as a switch. Explain.
A transistor of α = 0.99 and VBE = 0.7 V is connected in the common-emitter configuration as shown in the figure. If the transistor is in the saturation region, find the value of collector current.
In the circuit shown in the figure, the BJT has a current gain (β) of 50. For an emitter-base voltage VEB = 600 mV, calculate the emitter-collector voltage VEC (in volts).
In a common emitter amplifier, the input resistance is 1000 Ω, the peak value of Input signal voltage is 5 mV, and β = 60. The peak value of output current is
If l1, l2, l3 are the lengths of the emitter, base and collector of a transistor, then ____________.
Least doped region in a transistor ____________.
In the study of transistor as an amplifier, the ratio of collector current to emitter current is 0.98 then the ratio of collector current to base current will be ______.
ln switching circuit, transistor is in ON state and values of IC and IB are 4.2 mA and 5 µA respectively and RC= l k`Omega` and RB= 300 k`Omega`. If VBE = 0.5 V, find the value of VBB.
In a transistor in CE configuration, the ratio of power gain to voltage gain is ____________.
Which of the following regions of a transistors are, respectively, heavily dopped and lightly dopped?
In an npn transistor circuit, the collector current is 10 mA. If 90% of the electrons emitted reach the collector, the emitter current (IE) and base current (IB) are given by ____________.
For a common emitter configuration, if 'α' and 'β' have their usual meanings, the correct relationship between 'α' and 'β' is ______.
In a transistor, the thickness of the base region ____________.
A transistor is connected in C - E mode. If collector current is 72 × 10-5 A and α = 0.96, then base current will be ______.
In a study of transistor as an amplifier, the ratio of collector current to emitter current is 0.98. The collector current is 3mA, then base current will be approximately ______.
In the common-emitter configuration of a transistor, the current gain is more than 1 because [lb, le, and lc are base, emitter, and collector currents respectively] ______
A common emitter amplifier has a voltage gain of 50, an input impedance of 100Ω and an output impedance of 2000Ω. The power gain of the amplifier is ______.
In a p-n-p transistor circuit, the collector current is 10 mA. If 90% of the holes emitted from the emitter reach the collector, ______.
The current amplification factor for a transistor in its common emitter mode is 50. The current amplification factor in the common base mode of the transistor is ______.
Define α.
When an n-p-n junction transistor is used as an amplifier in common emitter mode, ______.
In the case of constants ‘α’ and ‘β’ of a transistor ______.
