Advertisements
Advertisements
प्रश्न
If five resistances, each of value 0.2 ohm, are connected in series, what will be the resultant resistance?
Advertisements
उत्तर
If five resistors, each of value 0.2 Ω, are connected in series, the resultant resistance will be the sum of the individual resistances.
R = R1 + R2 + R3 + R4 + R5
R = 0.2 + 0.2 +0.2 + 0.2 + 0.2
R = 5 x 0.2
R = 1 Ω
APPEARS IN
संबंधित प्रश्न
If the equivalent resistance is to be increased, then the number of resistances should be connected in
- Series
- Parallel
- Mixed arrangement
- None of the above
Why is the series arrangement not used for domestic circuits?
Write any two characteristics of a series combination of resistors.
The V-I graph for a series combination and for a parallel combination of two resistors is shown in the figure below. Which of the two A or B. represents the parallel combination? Give reasons for your answer.
(i) Two sets A and B, of three bulbs each, are glowing in two separate rooms. When one of the bulbs in set A is fused, the other two bulbs also cease to glow. But in set B, when one bulb fuses, the other two bulbs continue to glow. Explain why this phenomenon occurs.
(ii) Why do we prefer arrangements of Set B for house circuiting?
How does the presence of impurities in a metal affect its resistance?
How does the resistance of a wire change when:
its length is tripled?
How does the resistance of a wire change when:
its diameter is tripled?
State the order of resistivity of (i) a metal, (ii) a semiconductor and (iii) an insulator.
State how are the two resistors joined with a battery when equivalent resistance is more than either of the two resistances.
State how are the two resistors joined with a battery when same current flows in each resistor.
What potential difference is needed to drive a current o f 1 A through a 5 Ω resistor?
Answer the following question.
While studying the dependence of potential difference ( V) across a resistor on the current (I) passing through it, in order to determine the resistance of the resistor, a student took 5 readings for different values of current and plotted a graph between V and t. He got a straight line graph passing through the origin. What does the straight-line signify? Write the method of determining the resistance of the resister using this graph.
Bends in a rubber pipe reduce the flow of water through it. How would the bands in a wire affect its electric resistance?
Why are thick copper wires used as connecting wires?
Illustrate-combination of cells e.g., three cells, in parallel, explaining the combination briefly. Obtain an expression for current ‘i’ in the combination.
What should be the length of a nickel wire of area of cross-section 3 mm2 used for making a rheostat of 750 ohm? (ρ of nickle = 0.069 Ohm mm2/m)
