Advertisements
Advertisements
प्रश्न
What should be the length of a nickel wire of area of cross-section 3 mm2 used for making a rheostat of 750 ohm? (ρ of nickle = 0.069 Ohm mm2/m)
Advertisements
उत्तर
Specific resistance = ρ = 0.069 ohm `"mm"^2/"m"`
R = 750 W
A = 3mm2
as I = `("R" xx "A")/ρ = (750 xx 3)/0.069`
∴ length l = 32608.7 metre
The length of a nickel wire should be 32608.7 m.
संबंधित प्रश्न
If the equivalent resistance is to be increased, then the number of resistances should be connected in
- Series
- Parallel
- Mixed arrangement
- None of the above
A battery of 9 V is connected in series with resistors of 0.2 Ω, 0.3 Ω, 0.4 Ω, 0.5 Ω and 12 Ω, respectively. How much current would flow through the 12 Ω resistor?
If the length of a wire is doubled by taking more of wire, what happens to its resistance?
You are supplied with a number of 100 Ω resistors. How could you combine some of these resistors to make a 250 Ω resistor?
State how are the two resistors joined with a battery when same current flows in each resistor.
To increase the effective resistance in a circuit, the resistors are connected in _______________ .
A given metallic wire of resistance R is doubled on itself. What will be its new resistance?
Calculate the equivalent resistance between the points A and B for the following combination of resistors:
Six equal resistors of 1 ohm each are connected to form the sides of a hexagon ABCDEF. Calculate the resistance offered by the combination if the current enters at A and leaves it at D.
2Ω resistor A, 1Ω resistor B and 4Ω resistor C are connected in parallel. The combination is connected across a 2V battery of negligible resistance. Draw the diagram of the arrangement and calculate:
(i) The current in each resistor A and C,
(ii) The current through battery.
