Advertisements
Advertisements
Question
State SI unit of Magnetization.
Advertisements
Solution
The SI Unit of Magnetization is Am−1 in SI system.
APPEARS IN
RELATED QUESTIONS
What is Magnetization?
The magnetic moment of a magnet of dimensions 5 cm × 2.5 cm × 1.25 cm is 3 Am2. Calculate the intensity of magnetization.
State formula and S.I. unit of Magnetization.
Find the magnetization of a bar magnet of length 10 cm and cross-sectional area 4 cm2, if the magnetic moment is 2 Am2.
What is Magnetic intensity?
Give two points to distinguish between a paramagnetic and a diamagnetic substance ?
A long, straight wire carries a current i. The magnetising field intensity H is measured at a point P close to the wire. A long, cylindrical iron rod is brought close to the wire, so that the point P is at the centre of the rod. The value of H at P will ______________ .
Which of the following pairs has quantities of the same dimensions?
(a) Magnetic field B and magnetising field intensity H
(b) Magnetic field B and intensity of magnetisation I
(c) Magnetising field intensity H and intensity of magnetisation I
(d) Longitudinal strain and magnetic susceptibility
Mark out the correct options.
(a) Diamagnetism occurs in all materials.
(b) Diamagnetism results from the partial alignment of permanent magnetic moment.
(c) The magnetising field intensity, H, is always zero in free space.
(d) The magnetic field of induced magnetic moment is opposite the applied field.
The magnetic intensity H at the centre of a long solenoid carrying a current of 2.0 A, is found to be 1500 A m−1. Find the number of turns per centimetre of the solenoid.
At a certain temperature, a ferromagnetic material becomes paramagnetic. What is this temperature called?
A magnetic material of susceptibility 3 × 10−4, and magnetic intensity is 4 × 10−4 Am−1. Then The magnetization in the units of Am−1 is ______.
What does the ratio of magnetization to magnetic intensity indicate?
The moment of a magnet (15 cm × 2 cm × 1 cm) is 1.2 A-m2. What is its intensity of magnetization?
A solenoid has a core of material with relative permeability 500 and its windings carry a current of 1 A. The number of turns of the solenoid is 500 per meter. Calculate the magnetization of the material.
Explain the magnetization of a material.
A magnet of magnetic moment 3Am2 weighs 75 g. The density of the material of the magnet is 7500 kg/m3. what is magnetization?
The magnetic susceptibility of a paramagnetic material at - 73°C is 0.0075. Its value at - 173°C will be ______.
An electron moves in a circular orbit with uniform speed v. It produces a magnetic field B at the centre of the circle. The radius of the circle is [µ0 = permeability of free space, e = electronic charge]
Relative permeability of nickel is 550, then its magnetic susceptibility will be ____________.
For an isotropic medium B, µ, H and M, are related as (where B, µ0, H and Mz have their usual meaning in the context of magnetic material) ____________.
Coercivity of a magnet where the ferromagnet gets completely demagnetized is 6 x 103 Am-1. The minimum current required to be passed in a solenoid having 2000 turns per metre, so that the magnet gets completely demagnetized when placed inside the solenoid is ____________.
A bar magnet has coercivity 6 x 103 Am-1. It is desired to demagnetise it by inserting it inside a solenoid 10 cm long and having 40 turns. The current that should be sent through the solenoid is ____________.
A magnet of magnetic moment 6 Am2 weighs 65 g. The density of the material of the magnet is 6500 kg/m3. What is the magnetization?
What is the magnetization of a bar magnet having length 5 cm and area of cross section 2 cm2? (M = 1 Am2)
If Mz = magnetization of a paramagnetic sample, B external magnetic field, T = absolute temperature, C = curie constant then according to Curie's law in magnetism, the correct relation is ______.
The relative magnetic permeability (`mu_"r"`) of a substance is related to its susceptibility (`chi`) as ____________.
A bar magnet having length 5 cm and area of cross-section 4cm2 has magnetic moment 2Am2. If magnetic susceptibility is 5 x 10-6, the magnetic intensity will be ____________.
A particle of charge 'q' and mass 'm' moves in a circular orbit of radius 'r' with angular speed `omega`. The ratio of the magnitude of its magnetic moment to that of its angular momentum is ____________.
The magnetic moment produced in a sample of 2 gram is 8 x 10-7 A/m2. lf its density is 4g/cm3, then the magnetization of the sample is ____________.
The variation of intensity of magnetization (I) and applied magnetic field intensity (H) for three magnetic materials A, B, C are shown in the graph. The material A is ____________.
Find the intensity of magnetization of a magnet of moment 4 Am2 which weighs 50 gram. (Density of the material of a magnet = 5000 kg/m3)
Magnetization of a sample is ______.
Two parallel conducting wires of equal lengths placed distance 'd' apart carry currents 'I1' and 'I2' respectively in opposite directions. The resultant magnetic field at the midpoint of both the wires is ______.
(µ0 = permeability of free space.)
What are the dimensions of χ, the magnetic susceptibility? Consider an H-atom. Guess an expression for χ, upto a constant by constructing a quantity of dimensions of χ, out of parameters of the atom: e, m, v, R and µ0. Here, m is the electronic mass, v is electronic velocity, R is Bohr radius. Estimate the number so obtained and compare with the value of |χ| ~ 10–5 for many solid materials.
An example of a perfect diamagnet is a superconductor. This implies that when a superconductor is put in a magnetic field of intensity B, the magnetic field B inside the superconductor will be such that ______.
State unit and dimensions of Magnetic susceptibility.
The relation between relative permeability (`mu_r`) and magnetic susceptibility (`chi_m`) is:______.
An iron rod is subjected to a magnetising field of 1200 Am-1 .The susceptibility of iron is 599. Find the permeability and the magnetic field produced.
The magnetic susceptibility of iron is 5499. The relative permeability of iron will be ______.
