Advertisements
Advertisements
Question
State unit and dimensions of Magnetic susceptibility.
Advertisements
Solution
It is a measure of the magnetic behaviour of the material in the external applied magnetic field. χ is the ratio of two quantities with the same units (Am-1). Hence it is a dimensionless constant.
APPEARS IN
RELATED QUESTIONS
What is Magnetization?
Find the magnetization of a bar magnet of length 10 cm and cross-sectional area 4 cm2, if the magnetic moment is 2 Am2.
What is Magnetic intensity?
Give two points to distinguish between a paramagnetic and a diamagnetic substance ?
Which of the following pairs has quantities of the same dimensions?
(a) Magnetic field B and magnetising field intensity H
(b) Magnetic field B and intensity of magnetisation I
(c) Magnetising field intensity H and intensity of magnetisation I
(d) Longitudinal strain and magnetic susceptibility
Mark out the correct options.
(a) Diamagnetism occurs in all materials.
(b) Diamagnetism results from the partial alignment of permanent magnetic moment.
(c) The magnetising field intensity, H, is always zero in free space.
(d) The magnetic field of induced magnetic moment is opposite the applied field.
The magnetic field B and the magnetic intensity H in a material are found to be 1.6 T and 1000 A m−1, respectively. Calculate the relative permeability µr and the susceptibility χ of the material.
What is the magnetization of a bar magnet having a length of 6 cm and the area of cross-section 5 cm2?
A magnetic material of susceptibility 3 × 10−4, and magnetic intensity is 4 × 10−4 Am−1. Then The magnetization in the units of Am−1 is ______.
The moment of a magnet (15 cm × 2 cm × 1 cm) is 1.2 A-m2. What is its intensity of magnetization?
A solenoid has a core of material with relative permeability 500 and its windings carry a current of 1 A. The number of turns of the solenoid is 500 per meter. Calculate the magnetization of the material.
Explain the magnetization of a material.
A magnet of magnetic moment 3Am2 weighs 75 g. The density of the material of the magnet is 7500 kg/m3. what is magnetization?
The magnetic susceptibility of a paramagnetic material at - 73°C is 0.0075. Its value at - 173°C will be ______.
An iron rod is placed parallel to magnetic field of intensity 2000 A/m. The magnetic flux through the rod is 6 × 10−4 Wb and its cross-sectional area is 3cm2. The magnetic permeability of the rod in `"Wb"/("A" - "m")` is ____________.
Relative permeability of nickel is 550, then its magnetic susceptibility will be ____________.
The magnetization of bar magnet of length 5 cm, cross-sectional area 2 cm2 and net magnetic moment 1 Am2 is ______.
An iron rod of cross-sectional area 6 sq. cm is placed with its length parallel to a magnetic field of intensity 1200 Alm. The flux through the rod is 60 x 10-4 Wb. The permeability of the rod is ______.
Coercivity of a magnet where the ferromagnet gets completely demagnetized is 6 x 103 Am-1. The minimum current required to be passed in a solenoid having 2000 turns per metre, so that the magnet gets completely demagnetized when placed inside the solenoid is ____________.
A bar magnet has coercivity 6 x 103 Am-1. It is desired to demagnetise it by inserting it inside a solenoid 10 cm long and having 40 turns. The current that should be sent through the solenoid is ____________.
An iron rod is placed parallel to magnetic field of intensity 4000 A/m. The magnetic flux through the rod is 8 x 10-4 Wb and its cross-sectional area is 4 cm2 . The magnetic permeability of the rod in Wb/A - m is ____________.
The permeability of a metal is 0.01256 TmA- 1 What is its relative permeability?
The magnetic field (B) inside a long solenoid having 'n', turns per unit length and carrying current 'I' when iron core is kept in it is (`mu_0` = permeability of vacuum, `chi` = magnetic susceptibility) ____________.
A magnet of magnetic moment 6 Am2 weighs 65 g. The density of the material of the magnet is 6500 kg/m3. What is the magnetization?
A magnetizing field of 5000 A/m produces a magnetic flux of 4 x 10-5 Wb in an iron rod of cross-sectional area 0.4 cm2. The permeability of the rod in Wb/A-m, is ______.
SI Unit of Magnetization is ____________.
Two parallel wires of equal lengths are separated by a distance of 3m from each other. The currents flowing through first and second wire is 3A and 4.5A respectively in opposite directions. The resultant magnetic field at the mid-point of both wire is (µ0 = permeability of free space).
A cylindrical magnetic rod has length 5 cm and diameter 1 cm. It has uniform magnetization `5.3 xx 10^3 "A"/"m"^3`. Its net magnetic dipole moment is nearly `(pi = 22/7)`.
The dimensions of the relative magnetic permeability of the substance are ______.
A bar magnet having length 5 cm and area of cross-section 4cm2 has magnetic moment 2Am2. If magnetic susceptibility is 5 x 10-6, the magnetic intensity will be ____________.
The variation of intensity of magnetization (I) and applied magnetic field intensity (H) for three magnetic materials A, B, C are shown in the graph. The material A is ____________.
Find the intensity of magnetization of a magnet of moment 4 Am2 which weighs 50 gram. (Density of the material of a magnet = 5000 kg/m3)
A bar magnet has length 3 cm, cross-sectional area 4 cm2, and magnetic moment 6 Am2. The intensity of magnetisation of bar magnet is ______.
Two parallel conducting wires of equal lengths placed distance 'd' apart carry currents 'I1' and 'I2' respectively in opposite directions. The resultant magnetic field at the midpoint of both the wires is ______.
(µ0 = permeability of free space.)
One can define ...A... of a place as the vertical plane which passes through the imaginary line joining the magnetic North and the South–poles. Here, A refers to ______.
Magnetic permeability is maximum for ______
What are the dimensions of χ, the magnetic susceptibility? Consider an H-atom. Guess an expression for χ, upto a constant by constructing a quantity of dimensions of χ, out of parameters of the atom: e, m, v, R and µ0. Here, m is the electronic mass, v is electronic velocity, R is Bohr radius. Estimate the number so obtained and compare with the value of |χ| ~ 10–5 for many solid materials.
What is magnetic susceptibility?
An example of a perfect diamagnet is a superconductor. This implies that when a superconductor is put in a magnetic field of intensity B, the magnetic field B inside the superconductor will be such that ______.
For a medium of permeability µ, its magnetic susceptibility x is [µ 0 = permeability of vacuum]
