Advertisements
Advertisements
प्रश्न
State unit and dimensions of Magnetic susceptibility.
Advertisements
उत्तर
It is a measure of the magnetic behaviour of the material in the external applied magnetic field. χ is the ratio of two quantities with the same units (Am-1). Hence it is a dimensionless constant.
APPEARS IN
संबंधित प्रश्न
The magnetic moment of a magnet of dimensions 5 cm × 2.5 cm × 1.25 cm is 3 Am2. Calculate the intensity of magnetization.
State formula and S.I. unit of Magnetization.
A long, straight wire carries a current i. The magnetising field intensity H is measured at a point P close to the wire. A long, cylindrical iron rod is brought close to the wire, so that the point P is at the centre of the rod. The value of H at P will ______________ .
Mark out the correct options.
(a) Diamagnetism occurs in all materials.
(b) Diamagnetism results from the partial alignment of permanent magnetic moment.
(c) The magnetising field intensity, H, is always zero in free space.
(d) The magnetic field of induced magnetic moment is opposite the applied field.
The magnetic field B and the magnetic intensity H in a material are found to be 1.6 T and 1000 A m−1, respectively. Calculate the relative permeability µr and the susceptibility χ of the material.
Assume that each iron atom has a permanent magnetic moment equal to 2 Bohr magnetons (1 Bohr magneton equals 9.27 × 10−24 A m2). The density of atoms in iron is 8.52 × 1028 atoms m−3. (a) Find the maximum magnetisation I in a long cylinder of iron (b) Find the maximum magnetic field B on the axis inside the cylinder.
At a certain temperature, a ferromagnetic material becomes paramagnetic. What is this temperature called?
Answer the following question.
Define the term "Intensity" in the photon picture of electromagnetic radiation.
What is the magnetization of a bar magnet having a length of 6 cm and the area of cross-section 5 cm2?
A magnetic material of susceptibility 3 × 10−4, and magnetic intensity is 4 × 10−4 Am−1. Then The magnetization in the units of Am−1 is ______.
What does the ratio of magnetization to magnetic intensity indicate?
Explain the magnetization of a material.
The magnetic susceptibility is given by ______
A steel wire of length I has a magnetic moment M. It is then bent into a semicircular arc. The new magnetic moment is ______.
The magnetization of bar magnet of length 5 cm, cross-sectional area 2 cm2 and net magnetic moment 1 Am2 is ______.
A solenoid has core of a material with relative permeability 500 and its windings carry a current of 2 A. The number of turns of the solenoid is 500 per metre. The magnetization of the material is ______.
Coercivity of a magnet where the ferromagnet gets completely demagnetized is 6 x 103 Am-1. The minimum current required to be passed in a solenoid having 2000 turns per metre, so that the magnet gets completely demagnetized when placed inside the solenoid is ____________.
A bar magnet has coercivity 6 x 103 Am-1. It is desired to demagnetise it by inserting it inside a solenoid 10 cm long and having 40 turns. The current that should be sent through the solenoid is ____________.
An iron rod is placed parallel to magnetic field of intensity 4000 A/m. The magnetic flux through the rod is 8 x 10-4 Wb and its cross-sectional area is 4 cm2 . The magnetic permeability of the rod in Wb/A - m is ____________.
A cylindrical magnetic rod has length 5 cm and diameter 1 cm. It has uniform magnetization `5.3 xx 10^3 "A"/"m"^3`. Its net magnetic dipole moment is nearly `(pi = 22/7)`.
The dimensions of the relative magnetic permeability of the substance are ______.
The magnetic susceptibility of paramagnetic materials is ____________.
The magnetic moment produced in a sample of 2 gram is 8 x 10-7 A/m2. lf its density is 4g/cm3, then the magnetization of the sample is ____________.
Find the intensity of magnetization of a magnet of moment 4 Am2 which weighs 50 gram. (Density of the material of a magnet = 5000 kg/m3)
Magnetization of a sample is ______.
The magnetic moment produced in a substance of mass 5 gram is 6 x 10-7 Am2 If its density is 5 g/cm3, then intensity of magnetization in `"A"/"m"` will be ____________.
Magnetic lines of force due to a bar magnet do not intersect because ______.
A magnetic needle of magnetic moment 6.7 × 10–2 Am2 and moment of inertia 7.5 × 10–6 kg m2 is performing simple harmonic oscillations in a magnetic field of 0.01 T. Time taken for 10 complete oscillations is ______.
One can define ...A... of a place as the vertical plane which passes through the imaginary line joining the magnetic North and the South–poles. Here, A refers to ______.
The earth behaves as a magnet with magnetic field pointing approximately from the geographic ______.
What is magnetic susceptibility?
The dimensions of magnetic intensity are ______.
The magnetization of a bar magnet of length 4 cm, cross-sectional area 1 cm2 and magnetic moment 2 SI units is ______.
For a medium of permeability µ, its magnetic susceptibility x is [µ 0 = permeability of vacuum]
The relation between relative permeability (`mu_r`) and magnetic susceptibility (`chi_m`) is:______.
A solenoid having 400 turns/metre has a core of a material with relative permeability 300. If a current of 0.5 A is passed through it, then the magnetisation of the core material is nearly ______.
How does greater alignment of magnetic dipoles affect magnetisation?
What is the net effect of magnetic dipoles in random orientation?
What is the SI unit of magnetisation?
What is the SI unit of magnetic induction or flux density?
What is the SI unit of magnetic permeability?
Which expression gives the magnetic induction of a solenoid core using relative permeability?
A solenoid has 1000 turns per metre, carries a current of 2 A, and has a core with relative permeability 400. What is its approximate magnetic induction?
Why are hard magnetic materials chosen for permanent magnets?
