Advertisements
Advertisements
प्रश्न
State unit and dimensions of Magnetic susceptibility.
Advertisements
उत्तर
It is a measure of the magnetic behaviour of the material in the external applied magnetic field. χ is the ratio of two quantities with the same units (Am-1). Hence it is a dimensionless constant.
APPEARS IN
संबंधित प्रश्न
The magnetic moment of a magnet of dimensions 5 cm × 2.5 cm × 1.25 cm is 3 Am2. Calculate the intensity of magnetization.
State formula and S.I. unit of Magnetization.
Find the magnetization of a bar magnet of length 10 cm and cross-sectional area 4 cm2, if the magnetic moment is 2 Am2.
What is Magnetic intensity?
Give two points to distinguish between a paramagnetic and a diamagnetic substance ?
Mark out the correct options.
(a) Diamagnetism occurs in all materials.
(b) Diamagnetism results from the partial alignment of permanent magnetic moment.
(c) The magnetising field intensity, H, is always zero in free space.
(d) The magnetic field of induced magnetic moment is opposite the applied field.
The magnetic intensity H at the centre of a long solenoid carrying a current of 2.0 A, is found to be 1500 A m−1. Find the number of turns per centimetre of the solenoid.
The magnetic field B and the magnetic intensity H in a material are found to be 1.6 T and 1000 A m−1, respectively. Calculate the relative permeability µr and the susceptibility χ of the material.
Assume that each iron atom has a permanent magnetic moment equal to 2 Bohr magnetons (1 Bohr magneton equals 9.27 × 10−24 A m2). The density of atoms in iron is 8.52 × 1028 atoms m−3. (a) Find the maximum magnetisation I in a long cylinder of iron (b) Find the maximum magnetic field B on the axis inside the cylinder.
At a certain temperature, a ferromagnetic material becomes paramagnetic. What is this temperature called?
What does the ratio of magnetization to magnetic intensity indicate?
A solenoid has a core of material with relative permeability 500 and its windings carry a current of 1 A. The number of turns of the solenoid is 500 per meter. Calculate the magnetization of the material.
Explain the magnetization of a material.
A magnet of magnetic moment 3Am2 weighs 75 g. The density of the material of the magnet is 7500 kg/m3. what is magnetization?
Derive the relation between magnetic field intensity(H) and magnetization(M) for a magnetic material placed in a magnetic field.
An iron rod is placed parallel to magnetic field of intensity 2000 A/m. The magnetic flux through the rod is 6 × 10−4 Wb and its cross-sectional area is 3cm2. The magnetic permeability of the rod in `"Wb"/("A" - "m")` is ____________.
An electron moves in a circular orbit with uniform speed v. It produces a magnetic field B at the centre of the circle. The radius of the circle is [µ0 = permeability of free space, e = electronic charge]
The magnetic susceptibility is given by ______
A solenoid has core of a material with relative permeability 500 and its windings carry a current of 2 A. The number of turns of the solenoid is 500 per metre. The magnetization of the material is ______.
An iron rod of cross-sectional area 6 sq. cm is placed with its length parallel to a magnetic field of intensity 1200 Alm. The flux through the rod is 60 x 10-4 Wb. The permeability of the rod is ______.
Coercivity of a magnet where the ferromagnet gets completely demagnetized is 6 x 103 Am-1. The minimum current required to be passed in a solenoid having 2000 turns per metre, so that the magnet gets completely demagnetized when placed inside the solenoid is ____________.
A bar magnet has coercivity 6 x 103 Am-1. It is desired to demagnetise it by inserting it inside a solenoid 10 cm long and having 40 turns. The current that should be sent through the solenoid is ____________.
An iron rod is placed parallel to magnetic field of intensity 4000 A/m. The magnetic flux through the rod is 8 x 10-4 Wb and its cross-sectional area is 4 cm2 . The magnetic permeability of the rod in Wb/A - m is ____________.
A magnetizing field of 5000 A/m produces a magnetic flux of 4 x 10-5 Wb in an iron rod of cross-sectional area 0.4 cm2. The permeability of the rod in Wb/A-m, is ______.
SI Unit of Magnetization is ____________.
Assertion: Susceptibility is defined as the ratio of intensity of magnetisation I to magnetic intensity H.
Reason: Greater the value of susceptibility, smaller the value of intensity of magnetisation I.
What is the magnetization of a bar magnet having length 5 cm and area of cross section 2 cm2? (M = 1 Am2)
If Mz = magnetization of a paramagnetic sample, B external magnetic field, T = absolute temperature, C = curie constant then according to Curie's law in magnetism, the correct relation is ______.
The magnetic susceptibility of paramagnetic materials is ____________.
The relative magnetic permeability (`mu_"r"`) of a substance is related to its susceptibility (`chi`) as ____________.
The variation of intensity of magnetization (I) and applied magnetic field intensity (H) for three magnetic materials A, B, C are shown in the graph. The material A is ____________.
Magnetization of a sample is ______.
A bar magnet has length 3 cm, cross-sectional area 4 cm2, and magnetic moment 6 Am2. The intensity of magnetisation of bar magnet is ______.
Two parallel conducting wires of equal lengths placed distance 'd' apart carry currents 'I1' and 'I2' respectively in opposite directions. The resultant magnetic field at the midpoint of both the wires is ______.
(µ0 = permeability of free space.)
The magnetic moment produced in a substance of mass 5 gram is 6 x 10-7 Am2 If its density is 5 g/cm3, then intensity of magnetization in `"A"/"m"` will be ____________.
If `vec"H"` = magnetic intensity, `chi` = susceptibility, magnetic moment per unit volume `vec"M"` equals ______.
Magnetic permeability is maximum for ______
What are the dimensions of χ, the magnetic susceptibility? Consider an H-atom. Guess an expression for χ, upto a constant by constructing a quantity of dimensions of χ, out of parameters of the atom: e, m, v, R and µ0. Here, m is the electronic mass, v is electronic velocity, R is Bohr radius. Estimate the number so obtained and compare with the value of |χ| ~ 10–5 for many solid materials.
The dimensions of magnetic intensity are ______.
The magnetization of a bar magnet of length 4 cm, cross-sectional area 1 cm2 and magnetic moment 2 SI units is ______.
The relation between relative permeability (`mu_r`) and magnetic susceptibility (`chi_m`) is:______.
An iron rod is subjected to a magnetising field of 1200 Am-1 .The susceptibility of iron is 599. Find the permeability and the magnetic field produced.
State SI unit of Magnetization.
