Advertisements
Advertisements
Question
A magnetic material of susceptibility 3 × 10−4, and magnetic intensity is 4 × 10−4 Am−1. Then The magnetization in the units of Am−1 is ______.
Options
12 × 108
1.33 × 108
0.75 × 10−8
14 × 10−8
Advertisements
Solution
A magnetic material of susceptibility 3 × 10−4, and magnetic intensity is 4 × 10−4 Am−1. Then The magnetization in the units of Am−1 is 12 × 108.
Explanation:
`M = chiH = 3 xx 10^-4 xx 4 xx 10^-4 = 12 xx 10^-8 Am^-1`
RELATED QUESTIONS
State formula and S.I. unit of Magnetization.
Find the magnetization of a bar magnet of length 10 cm and cross-sectional area 4 cm2, if the magnetic moment is 2 Am2.
Give two points to distinguish between a paramagnetic and a diamagnetic substance ?
A long, straight wire carries a current i. The magnetising field intensity H is measured at a point P close to the wire. A long, cylindrical iron rod is brought close to the wire, so that the point P is at the centre of the rod. The value of H at P will ______________ .
Which of the following pairs has quantities of the same dimensions?
(a) Magnetic field B and magnetising field intensity H
(b) Magnetic field B and intensity of magnetisation I
(c) Magnetising field intensity H and intensity of magnetisation I
(d) Longitudinal strain and magnetic susceptibility
Mark out the correct options.
(a) Diamagnetism occurs in all materials.
(b) Diamagnetism results from the partial alignment of permanent magnetic moment.
(c) The magnetising field intensity, H, is always zero in free space.
(d) The magnetic field of induced magnetic moment is opposite the applied field.
The magnetic field inside a long solenoid of 50 turns cm−1 is increased from 2.5 × 10−3 T to 2.5 T when an iron core of cross-sectional area 4 cm2 is inserted into it. Find (a) the current in the solenoid (b) the magnetisation I of the core and (c) the pole strength developed in the core.
The magnetic field B and the magnetic intensity H in a material are found to be 1.6 T and 1000 A m−1, respectively. Calculate the relative permeability µr and the susceptibility χ of the material.
Assume that each iron atom has a permanent magnetic moment equal to 2 Bohr magnetons (1 Bohr magneton equals 9.27 × 10−24 A m2). The density of atoms in iron is 8.52 × 1028 atoms m−3. (a) Find the maximum magnetisation I in a long cylinder of iron (b) Find the maximum magnetic field B on the axis inside the cylinder.
Answer the following question.
Define the term "Intensity" in the photon picture of electromagnetic radiation.
What does the ratio of magnetization to magnetic intensity indicate?
The moment of a magnet (15 cm × 2 cm × 1 cm) is 1.2 A-m2. What is its intensity of magnetization?
Explain the magnetization of a material.
Derive the relation between magnetic field intensity(H) and magnetization(M) for a magnetic material placed in a magnetic field.
An iron rod is placed parallel to magnetic field of intensity 2000 A/m. The magnetic flux through the rod is 6 × 10−4 Wb and its cross-sectional area is 3cm2. The magnetic permeability of the rod in `"Wb"/("A" - "m")` is ____________.
An electron moves in a circular orbit with uniform speed v. It produces a magnetic field B at the centre of the circle. The radius of the circle is [µ0 = permeability of free space, e = electronic charge]
The magnetic susceptibility is given by ______
Relative permeability of nickel is 550, then its magnetic susceptibility will be ____________.
A solenoid has core of a material with relative permeability 500 and its windings carry a current of 2 A. The number of turns of the solenoid is 500 per metre. The magnetization of the material is ______.
An iron rod of cross-sectional area 6 sq. cm is placed with its length parallel to a magnetic field of intensity 1200 Alm. The flux through the rod is 60 x 10-4 Wb. The permeability of the rod is ______.
A bar magnet has coercivity 6 x 103 Am-1. It is desired to demagnetise it by inserting it inside a solenoid 10 cm long and having 40 turns. The current that should be sent through the solenoid is ____________.
The magnetic field (B) inside a long solenoid having 'n', turns per unit length and carrying current 'I' when iron core is kept in it is (`mu_0` = permeability of vacuum, `chi` = magnetic susceptibility) ____________.
A magnetizing field of 5000 A/m produces a magnetic flux of 4 x 10-5 Wb in an iron rod of cross-sectional area 0.4 cm2. The permeability of the rod in Wb/A-m, is ______.
A cylindrical magnetic rod has length 5 cm and diameter 1 cm. It has uniform magnetization `5.3 xx 10^3 "A"/"m"^3`. Its net magnetic dipole moment is nearly `(pi = 22/7)`.
Assertion: Susceptibility is defined as the ratio of intensity of magnetisation I to magnetic intensity H.
Reason: Greater the value of susceptibility, smaller the value of intensity of magnetisation I.
The magnetic susceptibility of paramagnetic materials is ____________.
A particle of charge 'q' and mass 'm' moves in a circular orbit of radius 'r' with angular speed `omega`. The ratio of the magnitude of its magnetic moment to that of its angular momentum is ____________.
Find the intensity of magnetization of a magnet of moment 4 Am2 which weighs 50 gram. (Density of the material of a magnet = 5000 kg/m3)
Magnetization of a sample is ______.
A bar magnet has length 3 cm, cross-sectional area 4 cm2, and magnetic moment 6 Am2. The intensity of magnetisation of bar magnet is ______.
Two parallel conducting wires of equal lengths placed distance 'd' apart carry currents 'I1' and 'I2' respectively in opposite directions. The resultant magnetic field at the midpoint of both the wires is ______.
(µ0 = permeability of free space.)
The earth behaves as a magnet with magnetic field pointing approximately from the geographic ______.
Magnetic permeability is maximum for ______
What are the dimensions of χ, the magnetic susceptibility? Consider an H-atom. Guess an expression for χ, upto a constant by constructing a quantity of dimensions of χ, out of parameters of the atom: e, m, v, R and µ0. Here, m is the electronic mass, v is electronic velocity, R is Bohr radius. Estimate the number so obtained and compare with the value of |χ| ~ 10–5 for many solid materials.
Define magnetization.
What is magnetic susceptibility?
An example of a perfect diamagnet is a superconductor. This implies that when a superconductor is put in a magnetic field of intensity B, the magnetic field B inside the superconductor will be such that ______.
State unit and dimensions of Magnetic susceptibility.
For a medium of permeability µ, its magnetic susceptibility x is [µ 0 = permeability of vacuum]
The relation between relative permeability (`mu_r`) and magnetic susceptibility (`chi_m`) is:______.
The magnetic susceptibility of iron is 5499. The relative permeability of iron will be ______.
