हिंदी

A magnetic material of susceptibility 3 × 10−4, and magnetic intensity is 4 × 10−4 Am−1. Then The magnetization in the units of Am−1 is ______.

Advertisements
Advertisements

प्रश्न

A magnetic material of susceptibility 3 × 10−4, and magnetic intensity is 4 × 104 Am1. Then The magnetization in the units of Am1 is ______.

विकल्प

  • 12 × 10

  • 1.33 × 10

  • 0.75 × 108

  • 14 × 10

MCQ
रिक्त स्थान भरें
Advertisements

उत्तर

A magnetic material of susceptibility 3 × 104, and magnetic intensity is 4 × 104 Am1. Then The magnetization in the units of Am1 is 12 × 108.

Explanation:

`M = chiH = 3 xx 10^-4 xx 4 xx 10^-4 = 12 xx 10^-8 Am^-1`

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 11: Magnetic materials - MCQ’S

वीडियो ट्यूटोरियलVIEW ALL [1]

संबंधित प्रश्न

The magnetic moment of a magnet of dimensions 5 cm × 2.5 cm × 1.25 cm is 3 Am2. Calculate the intensity of magnetization.


Give two points to distinguish between a paramagnetic and a diamagnetic substance ?


A long, straight wire carries a current i. The magnetising field intensity H is measured at a point P close to the wire. A long, cylindrical iron rod is brought close to the wire, so that the point P is at the centre of the rod. The value of H at P will ______________ .


Which of the following pairs has quantities of the same dimensions?
(a) Magnetic field B and magnetising field intensity H
(b) Magnetic field B and intensity of magnetisation I
(c) Magnetising field intensity H and intensity of magnetisation I
(d) Longitudinal strain and magnetic susceptibility


Mark out the correct options.
(a) Diamagnetism occurs in all materials.
(b) Diamagnetism results from the partial alignment of permanent magnetic moment.
(c) The magnetising field intensity, H, is always zero in free space.
(d) The magnetic field of induced magnetic moment is opposite the applied field.


The magnetic intensity H at the centre of a long solenoid carrying a current of 2.0 A, is found to be 1500 A m−1. Find the number of turns per centimetre of the solenoid.


The magnetic field B and the magnetic intensity H in a material are found to be 1.6 T and 1000 A m−1, respectively. Calculate the relative permeability µr and the susceptibility χ of the material.


Assume that each iron atom has a permanent magnetic moment equal to 2 Bohr magnetons (1 Bohr magneton equals 9.27 × 10−24 A m2). The density of atoms in iron is 8.52 × 1028 atoms m−3. (a) Find the maximum magnetisation I in a long cylinder of iron (b) Find the maximum magnetic field B on the axis inside the cylinder.


Answer the following question.
Define the term "Intensity" in the photon picture of electromagnetic radiation.


When a plate of magnetic material of size 10 cm × 0.5 cm × 0.2 cm (length, breath, and thickness respectively) is located in a magnetizing field of 0.5 × 104 A/m-1, then a magnetic moment of 0.5 Am2 is induced in it. Find the magnetic induction in the plate.


A solenoid has a core of material with relative permeability 500 and its windings carry a current of 1 A. The number of turns of the solenoid is 500 per meter. Calculate the magnetization of the material. 


The magnetic susceptibility of a paramagnetic material at - 73°C is 0.0075. Its value at - 173°C will be ______.


An iron rod is placed parallel to magnetic field of intensity 2000 A/m. The magnetic flux through the rod is 6 × 10−4 Wb and its cross-sectional area is 3cm2. The magnetic permeability of the rod in `"Wb"/("A" - "m")` is ____________.


The magnetic susceptibility is given by ______


Relative permeability of nickel is 550, then its magnetic susceptibility will be ____________.


For an isotropic medium B, µ, H and M, are related as (where B, µ0, H and Mz have their usual meaning in the context of magnetic material) ____________.


The permeability of a metal is 0.01256 TmA- 1  What is its relative permeability?


A magnet of magnetic moment 6 Am2 weighs 65 g. The density of the material of the magnet is 6500 kg/m3. What is the magnetization?


A magnetizing field of 5000 A/m produces a magnetic flux of 4 x 10-5 Wb in an iron rod of cross-sectional area 0.4 cm2. The permeability of the rod in Wb/A-m, is ______.


A cylindrical magnetic rod has length 5 cm and diameter 1 cm. It has uniform magnetization `5.3 xx 10^3 "A"/"m"^3`. Its net magnetic dipole moment is nearly `(pi = 22/7)`.


What is the magnetization of a bar magnet having length 5 cm and area of cross section 2 cm2? (M = 1 Am2)


If Mz = magnetization of a paramagnetic sample, B external magnetic field, T = absolute temperature, C = curie constant then according to Curie's law in magnetism, the correct relation is ______.


The magnetic susceptibility of paramagnetic materials is ____________.


A particle of charge 'q' and mass 'm' moves in a circular orbit of radius 'r' with angular speed `omega`. The ratio of the magnitude of its magnetic moment to that of its angular momentum is ____________.


The variation of intensity of magnetization (I) and applied magnetic field intensity (H) for three magnetic materials A, B, C are shown in the graph. The material A is ____________.


Magnetization of a sample is ______.


A bar magnet has length 3 cm, cross-sectional area 4 cm2, and magnetic moment 6 Am2. The intensity of magnetisation of bar magnet is ______.


Two parallel conducting wires of equal lengths placed distance 'd' apart carry currents 'I1' and 'I2' respectively in opposite directions. The resultant magnetic field at the midpoint of both the wires is ______.

0 = permeability of free space.)


The magnetic moment produced in a substance of mass 5 gram is 6 x 10-7 Am2 If its density is 5 g/cm3, then intensity of magnetization in `"A"/"m"` will be ____________.


Magnetic intensity is given by ______.


If `vec"H"` = magnetic intensity, `chi` = susceptibility, magnetic moment per unit volume `vec"M"` equals ______.


A magnetic needle of magnetic moment 6.7 × 10–2 Am2 and moment of inertia 7.5 × 10–6 kg m2 is performing simple harmonic oscillations in a magnetic field of 0.01 T. Time taken for 10 complete oscillations is ______.


Demagnetisation of magnets can be done by ______.

Susceptibility is positive and large for a ______.

Among which of the following the magnetic susceptibility does not depend on the temperature?

What are the dimensions of χ, the magnetic susceptibility? Consider an H-atom. Guess an expression for χ, upto a constant by constructing a quantity of dimensions of χ, out of parameters of the atom: e, m, v, R and µ0. Here, m is the electronic mass, v is electronic velocity, R is Bohr radius. Estimate the number so obtained and compare with the value of |χ| ~ 10–5 for many solid materials.


Define magnetization.


What is magnetic susceptibility?


State unit and dimensions of Magnetic susceptibility.


The dimensions of magnetic intensity are ______.


For a medium of permeability µ, its magnetic susceptibility x is [µ 0 = permeability of vacuum]


The relation between relative permeability (`mu_r`) and magnetic susceptibility (`chi_m`) is:______.


State SI unit of Magnetization.


The magnetic susceptibility of iron is 5499. The relative permeability of iron will be ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×