Advertisements
Advertisements
प्रश्न
The magnetic moment of a magnet of dimensions 5 cm × 2.5 cm × 1.25 cm is 3 Am2. Calculate the intensity of magnetization.
Advertisements
उत्तर
Intensity of magnetization I = M/V where,
M = magnetic moment
V = volume
V = 5 × 10-2 × 2.5 × 10-2 × 1.25 × 10-2
V = 1.5625 × 10-5 m3
I = M/V
I = 3/1.5625 × 10-5
I = 1.92 × 105 A-m
APPEARS IN
संबंधित प्रश्न
What is Magnetic intensity?
Give two points to distinguish between a paramagnetic and a diamagnetic substance ?
Mark out the correct options.
(a) Diamagnetism occurs in all materials.
(b) Diamagnetism results from the partial alignment of permanent magnetic moment.
(c) The magnetising field intensity, H, is always zero in free space.
(d) The magnetic field of induced magnetic moment is opposite the applied field.
The magnetic field inside a long solenoid of 50 turns cm−1 is increased from 2.5 × 10−3 T to 2.5 T when an iron core of cross-sectional area 4 cm2 is inserted into it. Find (a) the current in the solenoid (b) the magnetisation I of the core and (c) the pole strength developed in the core.
Assume that each iron atom has a permanent magnetic moment equal to 2 Bohr magnetons (1 Bohr magneton equals 9.27 × 10−24 A m2). The density of atoms in iron is 8.52 × 1028 atoms m−3. (a) Find the maximum magnetisation I in a long cylinder of iron (b) Find the maximum magnetic field B on the axis inside the cylinder.
A magnetic material of susceptibility 3 × 10−4, and magnetic intensity is 4 × 10−4 Am−1. Then The magnetization in the units of Am−1 is ______.
The moment of a magnet (15 cm × 2 cm × 1 cm) is 1.2 A-m2. What is its intensity of magnetization?
Define magnetic intensity.
The magnetic susceptibility is given by ______
The magnetization of bar magnet of length 5 cm, cross-sectional area 2 cm2 and net magnetic moment 1 Am2 is ______.
Coercivity of a magnet where the ferromagnet gets completely demagnetized is 6 x 103 Am-1. The minimum current required to be passed in a solenoid having 2000 turns per metre, so that the magnet gets completely demagnetized when placed inside the solenoid is ____________.
A bar magnet has coercivity 6 x 103 Am-1. It is desired to demagnetise it by inserting it inside a solenoid 10 cm long and having 40 turns. The current that should be sent through the solenoid is ____________.
An iron rod is placed parallel to magnetic field of intensity 4000 A/m. The magnetic flux through the rod is 8 x 10-4 Wb and its cross-sectional area is 4 cm2 . The magnetic permeability of the rod in Wb/A - m is ____________.
The permeability of a metal is 0.01256 TmA- 1 What is its relative permeability?
The magnetic field (B) inside a long solenoid having 'n', turns per unit length and carrying current 'I' when iron core is kept in it is (`mu_0` = permeability of vacuum, `chi` = magnetic susceptibility) ____________.
A magnet of magnetic moment 6 Am2 weighs 65 g. The density of the material of the magnet is 6500 kg/m3. What is the magnetization?
A magnetizing field of 5000 A/m produces a magnetic flux of 4 x 10-5 Wb in an iron rod of cross-sectional area 0.4 cm2. The permeability of the rod in Wb/A-m, is ______.
Two parallel wires of equal lengths are separated by a distance of 3m from each other. The currents flowing through first and second wire is 3A and 4.5A respectively in opposite directions. The resultant magnetic field at the mid-point of both wire is (µ0 = permeability of free space).
A cylindrical magnetic rod has length 5 cm and diameter 1 cm. It has uniform magnetization `5.3 xx 10^3 "A"/"m"^3`. Its net magnetic dipole moment is nearly `(pi = 22/7)`.
The dimensions of the relative magnetic permeability of the substance are ______.
What is the magnetization of a bar magnet having length 5 cm and area of cross section 2 cm2? (M = 1 Am2)
The magnetic susceptibility of paramagnetic materials is ____________.
A bar magnet having length 5 cm and area of cross-section 4cm2 has magnetic moment 2Am2. If magnetic susceptibility is 5 x 10-6, the magnetic intensity will be ____________.
The magnetic moment produced in a sample of 2 gram is 8 x 10-7 A/m2. lf its density is 4g/cm3, then the magnetization of the sample is ____________.
The variation of intensity of magnetization (I) and applied magnetic field intensity (H) for three magnetic materials A, B, C are shown in the graph. The material A is ____________.
Find the intensity of magnetization of a magnet of moment 4 Am2 which weighs 50 gram. (Density of the material of a magnet = 5000 kg/m3)
Magnetization of a sample is ______.
A bar magnet has length 3 cm, cross-sectional area 4 cm2, and magnetic moment 6 Am2. The intensity of magnetisation of bar magnet is ______.
The magnetic moment produced in a substance of mass 5 gram is 6 x 10-7 Am2 If its density is 5 g/cm3, then intensity of magnetization in `"A"/"m"` will be ____________.
Magnetic lines of force due to a bar magnet do not intersect because ______.
A magnetic needle of magnetic moment 6.7 × 10–2 Am2 and moment of inertia 7.5 × 10–6 kg m2 is performing simple harmonic oscillations in a magnetic field of 0.01 T. Time taken for 10 complete oscillations is ______.
One can define ...A... of a place as the vertical plane which passes through the imaginary line joining the magnetic North and the South–poles. Here, A refers to ______.
The earth behaves as a magnet with magnetic field pointing approximately from the geographic ______.
What are the dimensions of χ, the magnetic susceptibility? Consider an H-atom. Guess an expression for χ, upto a constant by constructing a quantity of dimensions of χ, out of parameters of the atom: e, m, v, R and µ0. Here, m is the electronic mass, v is electronic velocity, R is Bohr radius. Estimate the number so obtained and compare with the value of |χ| ~ 10–5 for many solid materials.
Define magnetization.
What is magnetic susceptibility?
A bar magnet has length 3 cm, cross-sectional area 2 cm3 and magnetic moment 3 Am2. The intensity of magnetisation of bar magnet is ______.
State unit and dimensions of Magnetic susceptibility.
The magnetization of a bar magnet of length 4 cm, cross-sectional area 1 cm2 and magnetic moment 2 SI units is ______.
An iron rod is subjected to a magnetising field of 1200 Am-1 .The susceptibility of iron is 599. Find the permeability and the magnetic field produced.
The magnetic susceptibility of iron is 5499. The relative permeability of iron will be ______.
