Advertisements
Advertisements
Question
Give a scientific reason:
For electric power transmission, copper or aluminium wire is used.
Advertisements
Solution
- Copper and aluminium are excellent electrical conductors.
- Since the resistance of copper and aluminium is very low, the amount of heat generated while carrying an electric current through them is also low.
Therefore, copper or aluminium wires are used for electricity transfer.
APPEARS IN
RELATED QUESTIONS
Why does the cord of an electric heater not glow while the heating element does?
Compute the heat generated while transferring 96000 coulomb of charge in one hour through a potential difference of 50 V.
How does the resistance of a wire vary with its area of cross-section?
Give two reasons why nichrome alloy is used for making the heating elements of electrical appliances.
An electric iron of resistance 20 ohms draws a current of 5 amperes. Calculate the heat produced in 30 seconds.
Derive the expression for the heat produced due to a current 'I' flowing for a time interval 't' through a resistor 'R' having a potential difference 'V' across its ends. With which name is this relation known?
The current passing through a room heater has been halved. What will happen to the heat produced by it?
Name the material which is used for making the filaments of an electric bulb.
The current passing through an electric kettle has been doubled. The heat produced will become:
(a) half
(b) double
(c) four time
(d) one-fourth
An electric fuse works on the:
(a) chemical effect of current
(b) magnetic effect of current
(c) lighting effect of current
(d) heating effect of current
Which of the following characteristic is not suitable for a fuse wire?
(a) thin and short
(b) thick and short
(c) low melting point
(d) higher resistance than rest of wiring
How does the wire in the filament of a light bulb behave differently to the other wires in the circuit when the current flows?
What property of the filament wire accounts for this difference?
Identify the figure and give its use.
These days when current in the circuit suddenly increases _______ switches are used.
A coil of an alloy _______ is used in electric heater cooker as a resistor.
Find the odd one out and give its explanation.
What is a short circuit?
Explain the importance/uses of fuse wire.
Heating effect of current is called ______
Mark the correct choice
- Assertion: Electric appliances with a metallic body have three wire connections.
- Reason: Three-pin connections reduce the heating of the connecting wires.
An electric iron draws a current of 4 A when connected to 220 V mains. Its resistance must be:
Why is parallel arrangement used in domestic wiring?
(a) Observe the diagram given below and state whether the bulb will glow or not when we switch on K.
(b) Is it safe to handle the bulb when the switch is OFF?
(c) Give a reason for your answer in (b).
When a switch is in OFF position,
- circuit starting from the positive terminal of the cell stops at the switch.
- circuit is open.
- no current flows through it.
- current flows after some time.
Choose the combination of correct answer from the following.
Unscramble the following words:
SFEU
Name two electric devices for each where
- heating effect of current is used and
- magnetic effect of current is used.
What are the uses of electromagnets?
Explain the working of an electric fuse.
It would cost a man Rs. 3.50 to buy 1.0 kW h of electrical energy from the Main Electricity Board. His generator has a maximum power of 2.0 kW. The generator produces energy at this maximum power for 3 hours. Calculate how much it would cost to buy the same amount of energy from the Main Electricity Board.
______ wire is used in the filament of the bulbs.
What is a trip switch?
An electrochemical cell converts ______ energy into ______ energy.
If 220 V potential difference is applied across an electric bulb, a current of 0.45 A flows in the bulb. What must be the power of the bulb?
An electric kettle consumes 1 kW of electric power when operated at 220 V. A fuse wire of what rating must be used for it?
What is the heating effect of electric current?
Anannya responded to the question: Why do electrical appliances with metallic bodies are connected to the mains through a three-pin plug, whereas an electric bulb can be connected with a two-pin plug?
She wrote: Three-pin connections reduce heating of connecting wires.
- Is her answer correct or incorrect? Justify.
- What is the function of a fuse in a domestic circuit?
An electric iron of resistance 20 Ω draws a current of 5 A. The heat developed in the iron in 30 seconds is ______.
