Advertisements
Advertisements
Question
Name the material which is used for making the filaments of an electric bulb.
Advertisements
Solution
Tungsten is used for making the filament of an electric bulb.
APPEARS IN
RELATED QUESTIONS
An electric iron of resistance 20 Ω takes a current of 5 A. Calculate the heat developed in 30 s.
An electric heater of resistance 8 Ω draws 15 A from the service mains 2 hours. Calculate the rate at which heat is developed in the heater.
A resistance of 25 Ω is connected to a 12 V battery. Calculate the heat energy in joules generated per minute.
The current passing through an electric kettle has been doubled. The heat produced will become:
(a) half
(b) double
(c) four time
(d) one-fourth
An electric fuse works on the:
(a) chemical effect of current
(b) magnetic effect of current
(c) lighting effect of current
(d) heating effect of current
An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at ‘minimum heating' it consumes a power of 360 W but at 'maximum heating’ it takes a power of 840 W. Calculate the current and resistance in each case.
A coil of an alloy _______ is used in electric heater cooker as a resistor.
What is overloading?
What is used to turn off the sudden increase in current in the electrical circuit of the house nowadays?
Write scientific reason.
A coil made up of alloy Nichrome is used in the electric heater cooker as a resistor.
True or False – If False give the correct answer
The fuse wire does not melts whenever there is overload in the wiring.
An electric iron draws a current of 4 A when connected to 220 V mains. Its resistance must be:
An electric kettle consumes 1 kW of electric power when operated at 220 V. A fuse wire of what rating must be used for it?
B1, B2 and B3 are three identical bulbs connected as shown in Figure. When all the three bulbs glow, a current of 3A is recorded by the ammeter A.
- What happens to the glow of the other two bulbs when the bulb B1 gets fused?
- What happens to the reading of A1, A2, A3 and A when the bulb B2 gets fused?
- How much power is dissipated in the circuit when all the three bulbs glow together?
An electric component used as a safety device is electric circuit is ______.
What is an electric fuse made up of?
A fuse is used in an electric circuit to stop high currents flowing through the circuit.
Define the following:
Electrolyte
An electric kettle consumes 1 kW of electric power when operated at 220 V. A fuse wire of what rating must be used for it?
Write an expression for the amount of heat produced in a resistor when an electric current is passed through it stating the meanings of the symbols used.
