Advertisements
Advertisements
प्रश्न
Name the logic gate which generated high output when at least one input is high.
Advertisements
उत्तर
OR Gate :
Y = A + B
` |("A", "B"), (0, 0), (0, 1), (1, 0), (1, 1) | |("Y" = "A" + "B"),(0),(1),(1),(1)|`
APPEARS IN
संबंधित प्रश्न
The output of NOR gate is high, when _______.
Identify the logic gates marked 'P' and 'Q' in the given circuit. Write the truth table for the combination.
The logic gate which produces LOW output when one of the input is HIGH and produces
HIGH output only when all of its inputs are LOW is called _______.
(A) AND gate
(B) OR gate
(C) NOR gate
(D) NAND gate
You are given the two circuits as shown in following figure. Show that circuit
- acts as OR gate while the circuit
- acts as AND gate.
(a)
(b)
You are given two circuits as shown in following figure, which consist of NAND gates. Identify the logic operation carried out by the two circuits.
(a)
(b)
Answer the following question :
Distinguish between digital and analogue signals.
You are given a circuit below. Write its truth table. Hence, identify the logic operation carried out by this circuit. Draw the logic symbol of the gate it corresponds to.
The following figure shows the input waveforms (A, B) and the output waveform (Y) of a gate. Identify the gate, write its truth table and draw its logic symbol.
Let \[X = A \overline{ BC} + B\overline{ CA} + C\overline{AB } .\] Evaluate X for A = 1, B = 0, C = 1.
Let \[X = A \overline{ BC} + B\overline{ CA} + C\overline{AB } .\] Evaluate X for A = B = C = 1.
Let \[X = A \overline{ BC} + B\overline{ CA} + C\overline{AB } .\] Evaluate X for A = B = C = 0.
Design a logical circuit using AND, OR and NOT gates to evaluate \[A \overline { BC } + B \overline{ CA }\] .
The amplification factor of a triode operating in the linear region depends strongly on ____________ .
Draw a diagram to show how NAND gates can be combined to obtain an OR gate. (Truth table is not, required)
Useful Constants and Relations:
| 1. | Charge of a proton | (e) | =1.6 × 10-19C |
| 2. | Planck's constant | (h) | = 6·6 × 10-34 Js |
| 3. | Mass of an electron | (m) | = 9·1× 10-31 kg |
| 4. | Permittivity of vacuum | (∈0) | =8 · 85 × 10-12 Fm-1 |
| 5. | `(1/(4pi∈_0))` | =9 ×109 mF-1 | |
| 6. | Permeability of vacuum | (μ0) | = 4π × 10-7 Hm-1 |
| 7. | `((mu_0)/(4pi))` | =1 × 10-7 Hm-1 | |
| 8. | Speed of light in vacuum | (c) | = 3× 108 ms-1 |
| 9. | Unified atomic mass unit | (u) |
= 931 MeV |
| 10. | Electron volt | (leV) | = 1.6 × 10-19 J |
The outputs of two NOT gates are fed to a NOR gate. Draw the logic circuit of the combination of gates. Write its truth table. Identify the gate equivalent to this circuit.
You are given circuit as shown in the figure, which consists of NAND gate. Identify the logic operation carried out by the two. Write the truth table. Identify the gates equivalent to the tow circuits.
A radar is sending out pules of 1 micro second duration at interval of 100 micro-second. The range of the radar is
The Boolean expression for NAND gate is
The output of 2-input or gate is zero only when its
An oscillator is nothing but an amplifier with
A CE amplifier has a voltage gain 50, an input impedance of 1000 ohm 1 and an output impedance of 200 ohm. The power gain of the amplifier will be
For the given circuit, the input digital signals are applied at terminals A, B, and C. What would be the output at terminal y?
Write the truth table for the circuit shown in figure. Name the gate that the circuit resembles.
Draw the output signals C1 and C2 in the given combination of gates (Figure).
An X-OR gate has following truth table:
| A | B | Y |
| 0 | 0 | 0 |
| 0 | 1 | 1 |
| 1 | 0 | 1 |
| 1 | 1 | 0 |
It is represented by following logic relation `Y = barA.B + A.barB`. Build this gate using AND, OR and NOT gates.
Which of the following gives a reversible operation?
