Advertisements
Advertisements
प्रश्न
Let \[X = A \overline{ BC} + B\overline{ CA} + C\overline{AB } .\] Evaluate X for A = 1, B = 0, C = 1.
Advertisements
उत्तर
Given:
Output
\[X = A \overline{ BC} + B\overline{ CA} + C\overline{AB } .\]
A = 1, B = 0, C = 1
\[X = 1 . ( \overline{{0 . 1)}} + 0 . ( \overline{{1 . 1)}} + 1 . ( \overline{{1 . 0)}}\]
\[ = 1 . \bar{0} + 0 . \bar{1} + 1 . \bar{0}\]
\[ = 1 . 1 + 0 . 0 + 1 . 1\]
\[ = 1 + 0 + 1\]
\[ = 1 + 1\]
\[ = 1\]
APPEARS IN
संबंधित प्रश्न
Write the truth table for the combination of the gates shown. Name the gates used.
Write the truth table for circuit given in figure below consisting of NOR gates and identify the logic operation (OR, AND, NOT) which this circuit is performing.
(Hint: A = 0, B = 1 then A and B inputs of second NOR gate will be 0 and hence Y=1. Similarly work out the values of Y for other combinations of A and B. Compare with the truth table of OR, AND, NOT gates and find the correct one.)
The arrangement given below represents a logic gate :
Copy the following truth table in your answer booklet and complete it showing outputs at C
and D.
| A | B | C | D |
| 0 | 0 | ||
| 1 | 0 | ||
| 0 | 1 | ||
| 1 | 0 |
Identify the logic gate represented by the circuit as shown and write its truth table.
An AND gate can be prepared by repetitive use of
(a) NOT gate
(b) OR gate
(c) NAND gate
(d) NOR gate.
Show that \[AB + \overline {AB }\] is always 1.
Show the variation of voltage with time, for a digital signal.
A radar is sending out pules of 1 micro second duration at interval of 100 micro-second. The range of the radar is
In potential barrier development in a junction diode opposes
The truth table for the following logic circuit is:
For the given circuit, the input digital signals are applied at the terminals A, B and C. What would be the output at the terminal y?
Two car garages have a common gate which needs to open automatically when a car enters either of the garages or cars enter both. Devise a circuit that resembles this situation using diodes for this situation.
An X-OR gate has following truth table:
| A | B | Y |
| 0 | 0 | 0 |
| 0 | 1 | 1 |
| 1 | 0 | 1 |
| 1 | 1 | 0 |
It is represented by following logic relation `Y = barA.B + A.barB`. Build this gate using AND, OR and NOT gates.
In the logic circuit shown in the figure, if input A and B are 0 to 1 respectively, the output at Y would be 'x'. The value of x is ______.
Which of the following gives a reversible operation?
