Advertisements
Advertisements
प्रश्न
You are given a circuit as shown in the figure, which consists of the NAND gate. Identify the logic operation carried out by the two. Write the truth table. Identify the gates equivalent to the tow circuit.
Advertisements
उत्तर
`"Y"_1 = bar"A.A" = bar"A"`
`"Y"_2 = bar"B.B" = bar"B"`
`"Y" = bar("Y"_1."Y"_2) = overline(bar"A".bar"B") = overlineoverline(A) + overlineoverline(B) = "A" + "B"`
The equivalent gate is OR gate
Truth table
| A | B | Y1 | Y2 | Y |
| 0 | 0 | 1 | 1 | 0 |
| 0 | 1 | 1 | 0 | 1 |
| 1 | 0 | 0 | 1 | 1 |
| 1 | 1 | 0 | 0 | 1 |
APPEARS IN
संबंधित प्रश्न
You are given the two circuits as shown in following figure. Show that circuit
- acts as OR gate while the circuit
- acts as AND gate.
(a)
(b)
Write the truth table for a NAND gate connected as given in the following figure.
Hence identify the exact logic operation carried out by this circuit
Draw the schematic symbols for AND, OR, NOT and NAND gate
What will be the values of input A and B for the Boolean expression `overline ((A +B) .(A*B)) =1?`
Let \[X = A \overline{ BC} + B\overline{ CA} + C\overline{AB } .\] Evaluate X for A = B = C = 1.
The amplification factor of a triode operating in the linear region depends strongly on ____________ .
The outputs of two NOT gates are fed to a NOR gate. Draw the logic circuit of the combination of gates. Write its truth table. Identify the gate equivalent to this circuit.
A radar is sending out pules of 1 micro second duration at interval of 100 micro-second. The range of the radar is
How would you set up a circuit to obtain NOT gate using a transistor?
A logic gate circuit has two inputs A and B and output Y. The voltage waveforms of A, B and Y are shown below.
The logic gate circuit is ______.
