Advertisements
Advertisements
प्रश्न
During the formation of a p-n junction ______.
पर्याय
diffusion current keeps increasing.
drift current remains constant.
both the diffusion current and drift current remain constant.
diffusion current remains almost constant but the drift current increases till both currents become equal.
Advertisements
उत्तर
During the formation of a p-n junction diffusion current remains almost constant but the drift current increases till both currents become equal.
संबंधित प्रश्न
Write the two processes that take place in the formation of a p-n junction.
Explain briefly with the help of necessary diagrams, the forward biasing of a p-n junction diode. Also draw characteristic curves.
Mention the important considerations required while fabricating a p-n junction diode to be used as a Light Emitting Diode (LED). What should be the order of band gap of an LED if it is required to emit light in the visible range?
The drift current in a p-n junction is
The diffusion current in a p-n junction is
In a p-n junction with open ends,
(a) there is no systematic motion of charge carries
(b) holes and conduction electrons systematically go from the p-side to n-side and from the n-side to p-side respectively
(c) there is no net charge transfer between the two sides
(d) there is a constant electric field near the junction.
The potential barrier existing across an unbiased p-n junction is 0.2 volt. What minimum kinetic energy a hole should have to diffuse from the p-side to the n-side if (a) the junction is unbiased, (b) the junction is forward-biased at 0.1 volt and (c) the junction is reverse-biased at 0.1 volt?
Consider a p-n junction diode having the characteristic \[i - i_0 ( e^{eV/kT} - 1) \text{ where } i_0 = 20\mu A\] . The diode is operated at T = 300 K . (a) Find the current through the diode when a voltage of 300 mV is applied across it in forward bias. (b) At what voltage does the current double?
If in a p-n junction diode, a square input signal of 10 V is applied as shown Then the output signal across RL will be ______
Zener breakdown occurs in a p-n junction having p and n both:
