Advertisements
Advertisements
प्रश्न
The mutual inductance of two coils is 10 mH. If the current in one of the coil changes from 5 A to 1 A in 0.2 s, calculate the emf induced in the other coil. Also calculate the induced charge flowing through the coil if its resistance is 5 Ω.
Advertisements
उत्तर
Data: M = 10 mH = 10-2 H, I1i = 5 A, I1f = 1 A, Δ t = 0.2 s, R = 5 Ω
The mutually induced emf in coil 2 due to the changing current in coil 1,
`"e"_21 = - "M" (triangle "I"_1)/(triangle "t") = - "M" ("I"_(1"f") - "I"_(1"i"))/(triangle "t")`
`= - (10^-2)((1 - 5)/0.2)` = 0.2 V
If ΔQ2 is the charge that flows through coil 2 due to the changing current in coil 1, the induced current in coil 2 is
`"I"_2 = (triangle "Q"_2)/(triangle "t") = "e"_2/"R"_2`
∴ ΔQ2 = `"e"_2/"R"_2 triangle "t" = 0.2/5 (0.2) = 0.04/5`
= 0.008 C = 8 mC
APPEARS IN
संबंधित प्रश्न
Draw a necessary arrangement for winding of primary and secondary coils in a step-up transformer. State its underlying principle and derive the relation between the primary and secondary voltages in terms of number of primary and secondary turns. Mention the two basic assumptions used in obtaining the above relation.
An air-cored solenoid with length 30 cm, area of cross-section 25 cm2 and number of turns 500, carries a current of 2.5 A. The current is suddenly switched off in a brief time of 10−3 s. How much is the average back emf induced across the ends of the open switch in the circuit? Ignore the variation in magnetic field near the ends of the solenoid.
Explain self induction and mutual induction
Two circular loops are placed with their centres separated by a fixed distance. How would you orient the loops to have (a) the largest mutual inductance (b) the smallest mutual inductance?
Find the mutual inductance between the straight wire and the square loop of figure.
A solenoid of length 20 cm, area of cross-section 4.0 cm2 and having 4000 turns is placed inside another solenoid of 2000 turns having a cross-sectional area 8.0 cm2 and length 10 cm. Find the mutual inductance between the solenoids.
A pair of adjacent coils has a mutual inductance of 1.5 H. If the current in one coil changes from 0 to 10 A in 0.2 s, what is the change of flux linkage with the other coil?
A long solenoid of length l, cross-sectional area A and having N1 turns (primary coil), has a small coil of N2 turns (secondary coil) wound about its center. Determine the Mutual inductance (M) of the two coils.
Define mutual inductance.
Two coils P and Q are kept near each other. When no current flows through coil P and current increases in coil Q at the rate 10 A/s, the e.m.f. in coil P is 20 mV. When coil Q carries no current and current of 1.6 A flows through coil P, the magnetic flux linked with the coil Q is ____________.
In an induction coil, the coefficient of mutual inductance is 6 henry. If a current of 10 ampere in the primary coil is cut-off in `1/1500"s"`, the e.m.f. at the terminals of the secondary coil will be ____________.
A current I = 10 sin (50 π t) ampere is passed in the first coil which induces a maximum e.m.f. of 5 π volt in the second coil. The mutual inductance between the coils is ______.
A coil of radius 'r' is placed on another coil (whose radius is 'R' and current flowing through it is changing) so that their centres coincide. (R>>r) if both the coils are coplanar then the mutual inductance between them is proportional to ______.
Two different wire loops are concentric and lie in the same plane. The current in the outer loop (I) is clockwise and increases with time. The induced current in the inner loop.
Alternating current of peak value `(2/pi)` ampere flows through the primary coil of transformer. The coefficient of mutual inductance between primary and secondary coil is 1 H. The peak e.m.f. induced in secondary coil is ______. (Frequency of a.c. = 50 Hz)
Two coils P and Q have mutual inductance 'M' H. If the current in the primary is I = I0 sin `omega`t, then the maximum vlaue of e.m.f. indued in coil Q is ____________.
The mutual inductance between two coils is 0.09 henry. If the current in the primary coil changes from 0 to 20 A in 0.006 s, the e.m.f. induced in the secondary coil at that instant is ____________.
The mutual inductance of a pair of coils is 0.75 H. If current in the primary coil changes from 0.5 A to zero in 0.01 s, find average induced e.m.f. in secondary coil ______.
Two circular coils have their centres at the same point. The mutual inductance between them will be maximum when their axes ______
Two conducting circular loops of radii R1 and R2 are placed in the same plane with their centres coinciding. If R1 >> R2, the mutual inductance M between them will be directly proportional to ______.
The mutual inductance M12 of coil 1 with respect to coil 2 ______.
- increases when they are brought nearer.
- depends on the current passing through the coils.
- increases when one of them is rotated about an axis.
- is the same as M21 of coil 2 with respect to coil 1.
An emf of 91 mV is induced in the windings of a coil when the current in o nearby coil is increasing at the rate of 1.3 A/s. what is the mutual inductance (M) of the two coils in mH?
A plane loop is shaped in the form as shown in figure with radii a = 20 cm and b = 10 cm and is placed in a uniform time varying magnetic field B = B0 sin ωt, where B0 = 10 mT and ω = 100 rad/s. The amplitude of the current induced in the loop if its resistance per unit length is equal to 50 × 10-3 Ω/m. The inductance of the loop is negligible is ______ A.
A toroid is a long coil of wire wound over a circular core. The major radius and cross-sectional radius of the toroid are R and r, respectively. The coefficient of mutual induction of the toroid is ______.
(The magnetic field in it is uniform, N = number of turns, R >> r, μ0 = permeability of free space)
Write the S.I. unit of mutual inductance.
A rectangular coil of wire 50 turn each of area 6 x 10-4 m2 is freely suspended in a field of 3 x 10-2 Wb / m2. Calculate the current flowing through the coil when it deflects through 60°, when torsional constant is 3.82 x 10-6 SI unit.
Two coils having self inductances L1 = 75 mH and L2 = 55 mH are coupled with each other. The coefficient of coupling (K) is 0. 75. Calculate the mutual inductance (M) of the two coils
Two planar concentric rings of metal wire having radii r and r2 (r₁ > r2) are placed in air. The current I is flowing through the coil of larger radius. The mutual inductance between the coils is given by ( μο = permeability of free space) ______.
The mutual inductance between a primary and secondary circuit is 0.4 H and the resistance in these circuits are \[20\Omega\] and \[4\Omega\] respectively. To produce a current of 0.5 A in the secondary, current in the primary must be changed at the rate of ______.
Two coils are placed close to each other. The mutual inductance of the pair of coils depends upon ______.
Which property of two coils describes a change in current in one coil inducing an emf in the other?
Which relation defines mutual inductance using the flux linkage \[N_2\phi_{21}\] and current \[I_1\] ?
Which formula relates mutual inductance, coefficient of coupling, and the self-inductances of coil 1 and coil 2?
What do \[L_1\] and \[L_2\] represent in \[M=K\sqrt{L_1L_2}\] ?
Which range and unit description apply to the coefficient of coupling \[K\] ?
Which pair gives other units of mutual inductance?
The Henry, the SI unit of mutual inductance, is named after whom?
Which equivalence correctly states the value of \[1\ \mathrm{H}\] ?
How does increasing the number of turns \[N_1\] and \[N_2\] affect mutual inductance?
What is the effect of a larger cross-sectional area of the coils on mutual inductance?
What happens to mutual inductance as the distance between coils increases?
What is the effect of winding coils on a soft iron core?
What does the coupling factor \[K\] quantify?
What is the total flux linkage of secondary solenoid \[S_2\] ?
What is \[M_{21}\] for two coaxial solenoids with the smaller solenoid inside the larger?
What is the magnetic field at the centre of the outer large coil when it carries current \[I_2\] ?
What is the magnetic flux through the inner small coil when current \[I_2\] flows in the outer large coil?
How does a transformer use mutual inductance?
How does wireless charging use mutual inductance?
