Advertisements
Advertisements
प्रश्न
Two circular loops are placed with their centres separated by a fixed distance. How would you orient the loops to have (a) the largest mutual inductance (b) the smallest mutual inductance?
Advertisements
उत्तर
(a) For the largest mutual inductance, the two loops should be placed coaxially. In this case, flux through a loop due to another loop is the largest; hence, mutual inductance is the largest.
(b) For the smallest mutual inductance, the two loops should be placed such that their axes are perpendicular to each other. In this case, flux through a loop due to another loop is the smallest (zero); hence, mutual inductance is the smallest.
APPEARS IN
संबंधित प्रश्न
Draw a necessary arrangement for winding of primary and secondary coils in a step-up transformer. State its underlying principle and derive the relation between the primary and secondary voltages in terms of number of primary and secondary turns. Mention the two basic assumptions used in obtaining the above relation.
An air-cored solenoid with length 30 cm, area of cross-section 25 cm2 and number of turns 500, carries a current of 2.5 A. The current is suddenly switched off in a brief time of 10−3 s. How much is the average back emf induced across the ends of the open switch in the circuit? Ignore the variation in magnetic field near the ends of the solenoid.
Find the mutual inductance between the straight wire and the square loop of figure.
A long solenoid of length l, cross-sectional area A and having N1 turns (primary coil), has a small coil of N2 turns (secondary coil) wound about its center. Determine the Mutual inductance (M) of the two coils.
A pair of the adjacent coil has a mutual inductance of 1.5 H. If the current in one coil varies from 0 to 20 A in 0.5 s, what is the change of flux linked with the other coil.
In an induction coil, the coefficient of mutual inductance is 6 henry. If a current of 10 ampere in the primary coil is cut-off in `1/1500"s"`, the e.m.f. at the terminals of the secondary coil will be ____________.
The coefficient of mutual inductance is 2H and induced e.m.f. across secondary is 2 kV. Current in the primary is reduced from 6 A and 3A. The time required for the change of current is ____________.
The mutual inductance M12 of coil 1 with respect to coil 2 ______.
- increases when they are brought nearer.
- depends on the current passing through the coils.
- increases when one of them is rotated about an axis.
- is the same as M21 of coil 2 with respect to coil 1.
The mutual inductance between a primary and secondary circuit is 0.4 H and the resistance in these circuits are \[20\Omega\] and \[4\Omega\] respectively. To produce a current of 0.5 A in the secondary, current in the primary must be changed at the rate of ______.
Which formula relates mutual inductance, coefficient of coupling, and the self-inductances of coil 1 and coil 2?
Which equivalence correctly states the value of \[1\ \mathrm{H}\] ?
How does increasing the number of turns \[N_1\] and \[N_2\] affect mutual inductance?
What is the effect of winding coils on a soft iron core?
What does the coupling factor \[K\] quantify?
What is the magnetic field inside primary solenoid \[S_1\] ?
What is the total flux linkage of secondary solenoid \[S_2\] ?
Why can \[B_2\] be assumed uniform across the entire area of the inner coil?
How does wireless charging use mutual inductance?
