हिंदी

Give any two types of a thermodynamic process.

Advertisements
Advertisements

प्रश्न

Give any two types of a thermodynamic process.

एक पंक्ति में उत्तर
Advertisements

उत्तर

Types of thermodynamic processes are:

  1. Isochoric process
  2. Isobaric process
  3. Adiabatic process
  4. Isothermal Revisable process
  5. Irreversible process
  6. cyclic process.
shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
2021-2022 (March) Set 1

संबंधित प्रश्न

Draw a p-V diagram showing positive work with varying pressure. 


State the assumptions made for thermodynamic processes.


Explain the cyclic process. 


An ideal gas of volume 2 L is adiabatically compressed to (1/10)th of its initial volume. Its initial pressure is 1.01 x 105 Pa, calculate the final pressure. (Given 𝛾 = 1.4) 


Write a note on free expansion.


When a cycle tyre suddenly bursts, the air inside the tyre expands. This process is ____________.


When food is cooked in a vessel by keeping the lid closed, after some time the steam pushes the lid outward. By considering the steam as a thermodynamic system, then in the cooking process


Give an expression for work done in an isothermal process.


Apply first law for an isothermal process.


Give the equation of state for an adiabatic process.


What is a cyclic process?


What is meant by a reversible and irreversible processes?


Can the given heat energy be completely converted to work in a cyclic process? If not, when can the heat can completely converted to work?


Derive the work done in an adiabatic process.


What are the limitations of the first law of thermodynamics?


For a given ideal gas 6 × 105 J heat energy is supplied and the volume of gas is increased from 4 m3 to 6 m3 at atmospheric pressure. Calculate

  1. the work done by the gas
  2. change in internal energy of the gas
  3. graph this process in PV and TV diagram

A monoatomic gas of pressure p having volume V expands isothermally to a volume 2V and then adiabatically to a volume 16V. The final pressure of the gas is ____________.

`("ratio of specific heats" = 5/3)`


An ideal gas is expanded isothermally from volume V1 to volume V2 and then compressed adiabatically to original volume V1. If the initial pressure is P1, the final pressure is P3 and net work done is W, then ____________.


Two identical samples of a gas are allowed to expand (i) isothermally (ii) adiabatically. Work done is ____________.


In which of the following processes, beat is neither absorbed nor released by a system?


An ideal gas A and a real gas B have their volumes increased from V to 2V under isothermal conditions. The increase in internal energy ____________.


For an isothermal expansion of a perfect gas, the value of `(Delta "P")/"P"` is equal to ____________.


Assertion: Equal volumes of monatomic and polyatomic gases are adiabatically compressed separately to equal compression ratio `("P"_2/"P"_1)`. Then monatomic gas will have greater final volume.

Reason: Among ideal gases, molecules of a monatomic gas have the smallest number of degrees of freedom.


Which of the following processes is reversible?  


In the figure shown here, the work done in the process ACBA is ______.


In a certain thermodynamical process, the pressure of a gas depends on its volume as kV3. The work done when the temperature changes from 100°C to 300°C will be ______ nR, where n denotes number of moles of a gas.


An ideal gas is taken through a cyclic process ABCDA as shown in figure. The net work done by the gas during the cycle is ______.


Explain how can a gas be expanded at constant temperature.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×