हिंदी

A Metal Ball Cools from 64 °C to 50 °C in 10 Minutes and to 42 °C in Next 10 Minutes. the Ratio of Rates of Fall of Temperature During the Two Intervals is _______. - Physics

Advertisements
Advertisements

प्रश्न

A metal ball cools from 64 °C to 50 °C in 10 minutes and to 42 °C in next 10 minutes. The ratio of rates of fall of temperature during the two intervals is _______.

विकल्प

  • `4/7`

  • `7/4`

  • 2

  • 2.5

MCQ
Advertisements

उत्तर

`7/4`

Rate of fall of temperature in first 10 minutes = R1 = `(64 - 50)/10`.°C/min = 1.4°C/min

Rate of fall of temperature in next 10 minutes = R2 = `(50 - 42)/10`.°C/min = 0.8°C/min

⇒ `R_1/R_2 = 7/4`

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
2013-2014 (March)

APPEARS IN

संबंधित प्रश्न

A pinhole is made in a hollow sphere of radius 5 cm whose inner wall is at temperature 727oC. Find the power radiated per unit area. [Stefan’s constant σ = 5.7 x 10-8 J/m2 s K4 , emissivity (e) = 0.2]


The light from the Sun is found to have a maximum intensity near the wavelength of 470 nm. Assuming the surface of the Sun as a black body, the temperature of the Sun is _____________.

[Wien's constant b = 2 .898 x l0- 3mK]


A body cools from 80° C to 70° C in 5 minutes and to 62° C in the next 5 minutes. Calculate the temperature of the surroundings.


It is said that mercury is used in defining the temperature scale because it expands uniformly with  temperature. If the temperature scale is not yet defined, is it logical to say that a substance expands uniformly with temperature?


Why do marine animals live deep inside a lake when the surface of the lake freezes?


Which of the curves in the following figure represents the relation between Celsius and Fahrenheit temperatures?


Which of the following pairs may give equal numerical values of the temperature of a body?


As the temperature is increased, the time period of a pendulum


The atmospheric temperature in the cities on sea-coast change very little. Explain


Two bodies at different temperatures are mixed in a calorimeter. Which of the following quantities remains conserved?


A resistance thermometer reads R = 20.0 Ω, 27.5 Ω, and 50.0 Ω at the ice point (0°C), the steam point (100°C) and the zinc point (420°C), respectively. Assuming that the resistance varies with temperature as Rθ = R0 (1 + αθ + βθ2), find the values of R0, α and β. Here θ represents the temperature on the Celsius scale.


A circular hole of diameter 2.00 cm is made in an aluminium plate at 0°C. What will be the diameter at 100°C? α for aluminium = 2.3 ×  10–5 °C–1.


A pendulum clock shows correct time at 20°C at a place where g = 9.800 m s–2. The pendulum consists of a light steel rod connected to a heavy ball. It is taken to a different place where g = 9.788 m s–1. At what temperature will the clock show correct time? Coefficient of linear expansion of steel = 12 × 10–6 °C–1.


The volume of a glass vessel is 1000 cc at 20°C. What volume of mercury should be poured into it at this temperature so that the volume of the remaining space does not change with temperature? Coefficients of cubical expansion of mercury and glass are 1.8 × 10–6 °C–1 and 9.0 × 10–6 °C–1 , respectively.


A steel wire of cross-sectional area 0.5 mm2 is held between two fixed supports. If the wire is just taut at 20°C, determine the tension when the temperature falls to 0°C. Coefficient of linear expansion of steel is 1.2 × 10–5 °C–1 and its Young's modulus is 2.0 × 10–11 Nm–2.


A steel ball that is initially at a pressure of 1.0 × 10Pa is heated from 20°C to 120°C, keeping its volume constant.
Find the pressure inside the ball. Coefficient of linear expansion of steel = 12 × 10–6 °C–1and bulk modulus of steel = 1.6 × 1011 Nm–2.


Answer the following question.

Clearly, state the difference between heat and temperature?


‘An object contains more heat’- is it a right statement? If not why?


Temperature and Heat are ______


The normal temperature of our body is 37°C.


Two identical beakers A and B contain equal volumes of two different liquids at 60°C each and is left to cool down. Liquid in A has a density of 8 × 102 kg/m3 and specific heat of 2000 J kg-1 K-1 while the liquid in B has a density of 103 kg m-3 and specific heat of 4000 J kg-1 K-1. Which of the following best describes their temperature versus time graph schematically? (assume the emissivity of both the beakers to be the same.)


Heat given to a body that raises its temperature by 1°C is ______.


The temperature of a liquid drops from 365 K to 361 K in 2 min. Find the time during which the temperature of the liquid drops from 344 K to 342 K.

(Take, room temperature = 293 K)


Which conversion is numerically correct for heat energy?


According to the Zeroth Law, if A is in thermal equilibrium with B, and B with C, then:


What physical quantity does temperature primarily indicate?


What is the best description of heat in thermodynamics?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×