Advertisements
Advertisements
प्रश्न
In a calorimeter, the heat given by the hot object is assumed to be equal to the heat taken by the cold object. Does it mean that heat of the two objects taken together remains constant?
Advertisements
उत्तर
Yes, heat of the two objects taken together remains constant. If no heat is lost to the surroundings, the heat of the two bodies taken together actually remains conserved.
APPEARS IN
संबंधित प्रश्न
A metal sphere cools at the rate of 4°C / min. when its temperature is 50°C. Find its rate of cooling at 45°C if the temperature of surroundings is 25°C.
A metal ball cools from 64 °C to 50 °C in 10 minutes and to 42 °C in next 10 minutes. The ratio of rates of fall of temperature during the two intervals is _______.
1000 tiny mercury droplets coalesce to form a bigger drop. In this process, temperature of the drop _______ .
(A) increases
(B) may increase or decrease
(C) decreases
(D) does not change
A body cools from 80° C to 70° C in 5 minutes and to 62° C in the next 5 minutes. Calculate the temperature of the surroundings.
The length of a brass rod is found to be less on a hot summer day than on a cold winter day as measured by the same aluminium scale. Can we conclude that brass shrinks on heating?
Which of the curves in the following figure represents the relation between Celsius and Fahrenheit temperatures?
When a hot liquid is mixed with a cold liquid, the temperature of the mixture ____________ .
Which of the following pairs of physical quantities may be represented in the same unit?
The heat capacity of a body depends on
(a) the heat given
(b) the temperature raised
(c) the mass of the body
(d) the material of the body
A railway track (made of iron) is laid in winter when the average temperature is 18°C. The track consists of sections of 12.0 m placed one after the other. How much gap should be left between two such sections, so that there is no compression during summer when the maximum temperature rises to 48°C? Coefficient of linear expansion of iron = 11 × 10–6 °C–1.
A circular hole of diameter 2.00 cm is made in an aluminium plate at 0°C. What will be the diameter at 100°C? α for aluminium = 2.3 × 10–5 °C–1.
A pendulum clock shows correct time at 20°C at a place where g = 9.800 m s–2. The pendulum consists of a light steel rod connected to a heavy ball. It is taken to a different place where g = 9.788 m s–1. At what temperature will the clock show correct time? Coefficient of linear expansion of steel = 12 × 10–6 °C–1.
The densities of wood and benzene at 0°C are 880 kg m3 and 900 kg m–3 , respectively. The coefficients of volume expansion are 1.2 × 10–3 °C–1 for wood and 1.5 × 10–3 °C–1for benzene. At what temperature will a piece of wood just sink in benzene?
A steel wire of cross-sectional area 0.5 mm2 is held between two fixed supports. If the wire is just taut at 20°C, determine the tension when the temperature falls to 0°C. Coefficient of linear expansion of steel is 1.2 × 10–5 °C–1 and its Young's modulus is 2.0 × 10–11 Nm–2.
Answer the following question.
Clearly, state the difference between heat and temperature?
Heat is measured in Celsius or centigrade.
Temperature in the form of energy.
The degree of hotness and coldness of a body is called ______.
The average kinetic energy of molecules of a gas is directly related to which physical quantity?
