Advertisements
Advertisements
प्रश्न
A spinning wheel A is brought in contact with another wheel B, initially at rest. Because of the friction at contact, the second wheel also starts spinning. Which of the following energies of the wheel B increases?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
Advertisements
उत्तर
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
When the wheel B starts spinning because of the friction at contact, it will gain kinetic energy and, hence, mechanical energy (kinetic + potential energies). Also, internal energy will increase, which increases with rise in temperature. Along with it, the generation of heat energy due to friction will lead to increase in the net sum of all the energies, i.e. total energy.
APPEARS IN
संबंधित प्रश्न
The light from the Sun is found to have a maximum intensity near the wavelength of 470 nm. Assuming the surface of the Sun as a black body, the temperature of the Sun is _____________.
[Wien's constant b = 2 .898 x l0- 3mK]
A metal ball cools from 64 °C to 50 °C in 10 minutes and to 42 °C in next 10 minutes. The ratio of rates of fall of temperature during the two intervals is _______.
The kinetic energy per molecule of a gs at temperature T is ________.
(a) `(3/2)RT`
(b) `(3/2)K_BT`
(c) `(2/3) RT`
(d) `(3/2)("RT"/M)`
A spherical shell is heated. The volume changes according to the equation Vθ = V0 (1 + γθ). Does the volume refer to the volume enclosed by the shell or the volume of the material making up the shell?
A spinning wheel is brought in contact with an identical wheel spinning at identical speed. The wheels slow down under the action of friction. Which of the following energies of the first wheel decreases?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
A body A is placed on a railway platform and an identical body B in a moving train. Which of the following energies of B are greater than those of A, as seen from the ground?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
A person's skin is more severely burnt when put in contact with 1 g of steam at 100°C than when put in contact with 1 g of water at 100°C. Explain
The atmospheric temperature in the cities on sea-coast change very little. Explain
The temperature of a solid object is observed to be constant during a period. In this period
(a) heat may have been supplied to the body
(b) heat may have been extracted from the body
(c) no heat is supplied to the body
(d) no heat is extracted from the body
A resistance thermometer reads R = 20.0 Ω, 27.5 Ω, and 50.0 Ω at the ice point (0°C), the steam point (100°C) and the zinc point (420°C), respectively. Assuming that the resistance varies with temperature as Rθ = R0 (1 + αθ + βθ2), find the values of R0, α and β. Here θ represents the temperature on the Celsius scale.
A circular hole of diameter 2.00 cm is made in an aluminium plate at 0°C. What will be the diameter at 100°C? α for aluminium = 2.3 × 10–5 °C–1.
In hot summer after a bath, the body’s __________.
Two tumblers of A and B have water at 50°C temperature. If the water from A and B is poured into tumbler C. The temperature of C is ______.
The normal temperature of our body is 37°C.
Give reasons for the following:
Hot metal ball of 80° C is dipped into water of 80°C. The ball will not contract.
Two identical beakers A and B contain equal volumes of two different liquids at 60°C each and is left to cool down. Liquid in A has a density of 8 × 102 kg/m3 and specific heat of 2000 J kg-1 K-1 while the liquid in B has a density of 103 kg m-3 and specific heat of 4000 J kg-1 K-1. Which of the following best describes their temperature versus time graph schematically? (assume the emissivity of both the beakers to be the same.)
What is the SI unit of heat?
Near the melting point of a solid, the heat supplied does NOT raise the temperature. Instead, what does it do?
Which state of matter has particles that vibrate about fixed equilibrium positions?
