Advertisements
Advertisements
प्रश्न
Heat and work are equivalent. This means, ____________ .
विकल्प
when we supply heat to a body we do work on it
when we do work on a body we supply heat to it
the temperature of a body can be increased by doing work on it
a body kept at rest may be set into motion along a line by supplying heat to it
Advertisements
उत्तर
the temperature of a body can be increased by doing work on it
According to the statement "heat and work are equivalent", heat supplied to the body increases its temperature. Similarly, work done on the body also increases its temperature.
For example: If work is done on rubbing the hands against each other, the temperature of the hands increases. So, we can say that heat and work are equivalent.
When heat is supplied to a body, we do not do work on it. When we are doing work on a body, it does not mean we are supplying heat to the body. Also, a body at rest cannot be set in motion along a line by supplying heat to it. So, these statements do not justify the equivalence of heat and work.
APPEARS IN
संबंधित प्रश्न
Answer the following:
There were two fixed points in the original Celsius scale as mentioned above which were assigned the number 0 °C and 100 °C respectively. On the absolute scale, one of the fixed points is the triple-point of water, which on the Kelvin absolute scale is assigned the number 273.16 K. What is the other fixed point on this (Kelvin) scale?
The kinetic energy per molecule of a gs at temperature T is ________.
(a) `(3/2)RT`
(b) `(3/2)K_BT`
(c) `(2/3) RT`
(d) `(3/2)("RT"/M)`
Does the temperature of a body depend on the frame from which it is observed?
The length of a brass rod is found to be less on a hot summer day than on a cold winter day as measured by the same aluminium scale. Can we conclude that brass shrinks on heating?
Which of the curves in the following figure represents the relation between Celsius and Fahrenheit temperatures?
A spinning wheel A is brought in contact with another wheel B, initially at rest. Because of the friction at contact, the second wheel also starts spinning. Which of the following energies of the wheel B increases?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
Water equivalent of a body is measured in ___________ .
The mechanical equivalent of heat ____________ .
A resistance thermometer reads R = 20.0 Ω, 27.5 Ω, and 50.0 Ω at the ice point (0°C), the steam point (100°C) and the zinc point (420°C), respectively. Assuming that the resistance varies with temperature as Rθ = R0 (1 + αθ + βθ2), find the values of R0, α and β. Here θ represents the temperature on the Celsius scale.
A circular hole of diameter 2.00 cm is made in an aluminium plate at 0°C. What will be the diameter at 100°C? α for aluminium = 2.3 × 10–5 °C–1.
A steel rod of length 1 m rests on a smooth horizontal base. If it is heated from 0°C to 100°C, what is the longitudinal strain developed?
A steel wire of cross-sectional area 0.5 mm2 is held between two fixed supports. If the wire is just taut at 20°C, determine the tension when the temperature falls to 0°C. Coefficient of linear expansion of steel is 1.2 × 10–5 °C–1 and its Young's modulus is 2.0 × 10–11 Nm–2.
One day in 1922, the air temperature was measured at 59°C in the shade in Libya ______.
Heat is measured in Celsius or centigrade.
Temperature in the form of energy.
Analogy
Evaporation:: 100°C: Freezing:: ______.
Heat given to a body that raises its temperature by 1°C is ______.
1 calorie is equal to how many joules?
Which state of matter has particles that vibrate about fixed equilibrium positions?
