Advertisements
Advertisements
प्रश्न
When a hot liquid is mixed with a cold liquid, the temperature of the mixture ____________ .
विकल्प
first decreases then becomes constant
first increases then becomes constant
continuously increases
is undefined for some time and then becomes nearly constant
Advertisements
उत्तर
is undefined for some time and then becomes nearly constant
When hot liquid is mixed with cold liquid, the molecules collide and transfer heat. When heat is transferred, the temperature is undefined. Once the heat energy is shared by the molecules, the system reaches equilibrium and the temperature becomes nearly constant.
APPEARS IN
संबंधित प्रश्न
Two copper spheres of radii 6 cm and 12 cm respectively are suspended in an evacuated enclosure. Each of them are at a temperature 15°C above the surroundings. The ratio of their rate of loss of heat is.................
- 2:1
- 1:4
- 1:8
- 8:1
Answer the following:
There were two fixed points in the original Celsius scale as mentioned above which were assigned the number 0 °C and 100 °C respectively. On the absolute scale, one of the fixed points is the triple-point of water, which on the Kelvin absolute scale is assigned the number 273.16 K. What is the other fixed point on this (Kelvin) scale?
1000 tiny mercury droplets coalesce to form a bigger drop. In this process, temperature of the drop _______ .
(A) increases
(B) may increase or decrease
(C) decreases
(D) does not change
The substance which allows heat radiations to pass through is _______.
(A) iron
(B) water vapour
(C) wood
(D) dry air
If the temperature of a uniform rod is slightly increased by ∆t, its moment of inertia I about a line parallel to itself will increase by
An aluminium sphere is dipped into water at 10°C. If the temperature is increased, the force of buoyancy
In a calorimeter, the heat given by the hot object is assumed to be equal to the heat taken by the cold object. Does it mean that heat of the two objects taken together remains constant?
The atmospheric temperature in the cities on sea-coast change very little. Explain
The mechanical equivalent of heat ____________ .
If heat is supplied to a solid, its temperature
(a) must increase
(b) may increase
(c) may remain constant
(d) may decrease
A metre scale made of steel is calibrated at 20°C to give correct reading. Find the distance between the 50 cm mark and the 51 cm mark if the scale is used at 10°C. Coefficient of linear expansion of steel is 1.1 × 10–5 °C–1.
The densities of wood and benzene at 0°C are 880 kg m3 and 900 kg m–3 , respectively. The coefficients of volume expansion are 1.2 × 10–3 °C–1 for wood and 1.5 × 10–3 °C–1for benzene. At what temperature will a piece of wood just sink in benzene?
In hot summer after a bath, the body’s __________.
Temperature and Heat are ______
One day in 1922, the air temperature was measured at 59°C in the shade in Libya ______.
Temperature in the form of energy.
Analogy
Evaporation:: 100°C: Freezing:: ______.
What is the SI unit of heat?
What is the approximate interatomic spacing in gases at NTP (Normal Temperature and Pressure)?
The concept of thermal equilibrium, where heat flows between bodies until they reach the same temperature, is the basis of which law of thermodynamics?
