हिंदी

A Pinhole is Made in a Hollow Sphere of Radius 5 Cm Whose Inner Wall is at Temperature 727 C. Find the Power Radiated per Unit Area.

Advertisements
Advertisements

प्रश्न

A pinhole is made in a hollow sphere of radius 5 cm whose inner wall is at temperature 727oC. Find the power radiated per unit area. [Stefan’s constant σ = 5.7 x 10-8 J/m2 s K4 , emissivity (e) = 0.2]

Advertisements

उत्तर

Given:-

T = 727 + 273 = 1000 K,

σ = 5.7 x 10-8 J/m2sK4, e = 0.2

To find:- Power radiated (E)

Formula:-

`(E)Q/(At)=sigmaeT^4`

Calculation:- From formula,

E = 0.2 x 5.7 x 10-8 x (1000)4

    = 11400

∴ E = 1.14 x 104 watt/m2

The power radiated per unit area is 1.14 x 104 watt/m2.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
2014-2015 (October)

APPEARS IN

संबंधित प्रश्न

The dimensions of emissive power are ______.


Compute the temperature at which the r.m.s. speed of nitrogen molecules is 832 m/s. [Universal gas constant, R = 8320 J/k mole K, molecular weight of nitrogen = 28.]


The susceptibility of magnesium at 300 K is 2.4 x 10-5. At what temperature will the susceptibility increase to 3.6 x 10-5?


Answer the following:

There were two fixed points in the original Celsius scale as mentioned above which were assigned the number 0 °C and 100 °C respectively. On the absolute scale, one of the fixed points is the triple-point of water, which on the Kelvin absolute scale is assigned the number 273.16 K. What is the other fixed point on this (Kelvin) scale?


Can the bulb of a thermometer be made of an adiabatic wall?


A spherical shell is heated. The volume changes according to the equation Vθ = V0 (1 + γθ). Does the volume refer to the volume enclosed by the shell or the volume of the material making up the shell?


If the temperature of a uniform rod is slightly increased by ∆t, its moment of inertia I about a line parallel to itself will increase by


The temperature of water at the surface of a deep lake is 2°C. The temperature expected at the bottom is


In a calorimeter, the heat given by the hot object is assumed to be equal to the heat taken by the cold object. Does it mean that heat of the two objects taken together remains constant?


A body A is placed on a railway platform and an identical body B in a moving train. Which of the following energies of B are greater than those of A, as seen from the ground?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal


When a solid melts or a liquid boils, the temperature does not increase even when heat is supplied. Where does the energy go?


A person's skin is more severely burnt when put in contact with 1 g of steam at 100°C than when put in contact with 1 g of water at 100°C. Explain


The atmospheric temperature in the cities on sea-coast change very little. Explain


Which of the following pairs of physical quantities may be represented in the same unit?


A resistance thermometer reads R = 20.0 Ω, 27.5 Ω, and 50.0 Ω at the ice point (0°C), the steam point (100°C) and the zinc point (420°C), respectively. Assuming that the resistance varies with temperature as Rθ = R0 (1 + αθ + βθ2), find the values of R0, α and β. Here θ represents the temperature on the Celsius scale.


A metre scale made of steel is calibrated at 20°C to give correct reading. Find the distance between the 50 cm mark and the 51 cm mark if the scale is used at 10°C. Coefficient of linear expansion of steel is 1.1 × 10–5 °C–1.


A railway track (made of iron) is laid in winter when the average temperature is 18°C. The track consists of sections of 12.0 m placed one after the other. How much gap should be left between two such sections, so that there is no compression during summer when the maximum temperature rises to 48°C? Coefficient of linear expansion of iron = 11 × 10–6 °C–1.


A pendulum clock shows correct time at 20°C at a place where g = 9.800 m s–2. The pendulum consists of a light steel rod connected to a heavy ball. It is taken to a different place where g = 9.788 m s–1. At what temperature will the clock show correct time? Coefficient of linear expansion of steel = 12 × 10–6 °C–1.


A steel wire of cross-sectional area 0.5 mm2 is held between two fixed supports. If the wire is just taut at 20°C, determine the tension when the temperature falls to 0°C. Coefficient of linear expansion of steel is 1.2 × 10–5 °C–1 and its Young's modulus is 2.0 × 10–11 Nm–2.


‘An object contains more heat’- is it a right statement? If not why?


Temperature and Heat are ______


Our normal body temperature is ______.


One day in 1922, the air temperature was measured at 59°C in the shade in Libya ______.


Give reasons for the following:

Hot metal ball of 80° C is dipped into water of 80°C. The ball will not contract.


Heat given to a body that raises its temperature by 1°C is ______.


Which state of matter has particles that vibrate about fixed equilibrium positions?


What is the approximate interatomic spacing in gases at NTP (Normal Temperature and Pressure)?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×