हिंदी

The Susceptibility of Magnesium at 300k is 1.2 X 10-5. at What Temperature Will the Susceptibility Increase to 1.8 X 10-5

Advertisements
Advertisements

प्रश्न

The susceptibility of magnesium at 300K is 1.2 x 10-5. At what temperature will the susceptibility increase to 1.8 X 10-5?

Advertisements

उत्तर

Given: `chi_1` = 1.2 x  10-5, T1 = 300 K,

`chi_2` = 1.8 x 10-5

To find: Required temperature (T2)

Formula: χT = constant

Calculation: From formula

`chi_1T_1 =chi_2T_2`

`:. T_2 = (chi_1T_1)/chi_2 = (1.2 xx 10^(-5) xx 300)/(1.8 xx 10^(-5))`

∴ T2 = 200 K
The required temperature is 200 K.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
2015-2016 (July)

APPEARS IN

संबंधित प्रश्न

Two copper spheres of radii 6 cm and 12 cm respectively are suspended in an evacuated enclosure. Each of them are at a temperature 15°C above the surroundings. The ratio of their rate of loss of heat is.................

  1. 2:1
  2. 1:4
  3. 1:8
  4. 8:1

A metal ball cools from 64 °C to 50 °C in 10 minutes and to 42 °C in next 10 minutes. The ratio of rates of fall of temperature during the two intervals is _______.


Answer the following:

There were two fixed points in the original Celsius scale as mentioned above which were assigned the number 0 °C and 100 °C respectively. On the absolute scale, one of the fixed points is the triple-point of water, which on the Kelvin absolute scale is assigned the number 273.16 K. What is the other fixed point on this (Kelvin) scale?


1000 tiny mercury droplets coalesce to form a bigger drop. In this process, temperature of the drop _______ .

(A) increases

(B) may increase or decrease

(C) decreases

(D) does not change


The kinetic energy per molecule of a gs at temperature T is ________.

(a) `(3/2)RT`

(b) `(3/2)K_BT`

(c) `(2/3) RT`

(d) `(3/2)("RT"/M)`


The length of a brass rod is found to be less on a hot summer day than on a cold winter day as measured by the same aluminium scale. Can we conclude that brass shrinks on heating?


Which of the curves in the following figure represents the relation between Celsius and Fahrenheit temperatures?


If the temperature of a uniform rod is slightly increased by ∆t, its moment of inertia I about a line parallel to itself will increase by


A body A is placed on a railway platform and an identical body B in a moving train. Which of the following energies of B are greater than those of A, as seen from the ground?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal


A person's skin is more severely burnt when put in contact with 1 g of steam at 100°C than when put in contact with 1 g of water at 100°C. Explain


Water equivalent of a body is measured in ___________ .


The mechanical equivalent of heat ____________ .


A resistance thermometer reads R = 20.0 Ω, 27.5 Ω, and 50.0 Ω at the ice point (0°C), the steam point (100°C) and the zinc point (420°C), respectively. Assuming that the resistance varies with temperature as Rθ = R0 (1 + αθ + βθ2), find the values of R0, α and β. Here θ represents the temperature on the Celsius scale.


A concrete slab has a length of 10 m on a winter night when the temperature is 0°C. Find the length of the slab on a summer day when the temperature is 35­°C. The coefficient of linear expansion of concrete is 1.0 × 10–5 °C–1.


A railway track (made of iron) is laid in winter when the average temperature is 18°C. The track consists of sections of 12.0 m placed one after the other. How much gap should be left between two such sections, so that there is no compression during summer when the maximum temperature rises to 48°C? Coefficient of linear expansion of iron = 11 × 10–6 °C–1.


A pendulum clock shows correct time at 20°C at a place where g = 9.800 m s–2. The pendulum consists of a light steel rod connected to a heavy ball. It is taken to a different place where g = 9.788 m s–1. At what temperature will the clock show correct time? Coefficient of linear expansion of steel = 12 × 10–6 °C–1.


A steel wire of cross-sectional area 0.5 mm2 is held between two fixed supports. If the wire is just taut at 20°C, determine the tension when the temperature falls to 0°C. Coefficient of linear expansion of steel is 1.2 × 10–5 °C–1 and its Young's modulus is 2.0 × 10–11 Nm–2.


Answer the following question.

Clearly, state the difference between heat and temperature?


Temperature and Heat are ______


Our normal body temperature is ______.


Heat is measured in Celsius or centigrade.


The degree of hotness and coldness of a body is called ______.  


When two bodies at different temperatures are placed in contact, heat flows from ______.


1 calorie is equal to how many joules?


Which of the following correctly differentiates heat from temperature?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×