Advertisements
Advertisements
प्रश्न
The volume of a glass vessel is 1000 cc at 20°C. What volume of mercury should be poured into it at this temperature so that the volume of the remaining space does not change with temperature? Coefficients of cubical expansion of mercury and glass are 1.8 × 10–6 °C–1 and 9.0 × 10–6 °C–1 , respectively.
Advertisements
उत्तर
At T = 20°C, the volume of the glass vessel, Vg = 1000 cc.
Let the volume of mercury be VHg .
Coefficient of cubical expansion of mercury, γHg = 1.8 × 10–4 /°C
Coefficient of cubical expansion of glass, γg = 9 × 10–6 /°C
Change in temperature, ΔT, is same for glass and mercury.
Let the volume of glass and mercury after rise in temperature be V'g and V'Hgrespectively.
Volume of remaining space after change in temperature,(V'g – V'Hg) = Volume of the remaining space (initial),(Vg – VHg)
We know: V'g = Vg (1 + γg ΔT) ...(1)
V'Hg = VHg (1 + γHg ΔT) ...(2)
Subtracting (2) from (1), we get:
\[V '_g - V '_{Hg} = V_g - V_{Hg} + V_g \gamma_g ∆ T - V_{Hg} \gamma_{Hg} ∆ T\]
\[ \Rightarrow V_g \gamma_g ∆ T - V_{Hg} \gamma_{Hg} ∆ T = 0\]
\[ \Rightarrow \frac{V_g}{V_{Hg}} = \frac{\gamma_{Hg}}{\gamma_g}\]
\[ \Rightarrow \frac{1000}{V_{Hg}} = \frac{1 . 8 \times {10}^{- 4}}{9 \times {10}^{- 6}}\]
\[ \Rightarrow V_{Hg} = \frac{9 \times {10}^{- 3}}{1 . 8 \times {10}^{- 4}}\]
\[ \Rightarrow V_{Hg} = 50 cc\]
Therefore, the volume of mercury that should be poured into the glass vessel is 50 cc.
APPEARS IN
संबंधित प्रश्न
A pinhole is made in a hollow sphere of radius 5 cm whose inner wall is at temperature 727oC. Find the power radiated per unit area. [Stefan’s constant σ = 5.7 x 10-8 J/m2 s K4 , emissivity (e) = 0.2]
Compute the temperature at which the r.m.s. speed of nitrogen molecules is 832 m/s. [Universal gas constant, R = 8320 J/k mole K, molecular weight of nitrogen = 28.]
It is said that mercury is used in defining the temperature scale because it expands uniformly with temperature. If the temperature scale is not yet defined, is it logical to say that a substance expands uniformly with temperature?
The density of water at 4°C is supposed to be 1000 kg m–3. Is it same at sea level and at high altitude?
Which of the following pairs may give equal numerical values of the temperature of a body?
An aluminium sphere is dipped into water at 10°C. If the temperature is increased, the force of buoyancy
A spinning wheel A is brought in contact with another wheel B, initially at rest. Because of the friction at contact, the second wheel also starts spinning. Which of the following energies of the wheel B increases?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
A body A is placed on a railway platform and an identical body B in a moving train. Which of the following energies of B are greater than those of A, as seen from the ground?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
A railway track (made of iron) is laid in winter when the average temperature is 18°C. The track consists of sections of 12.0 m placed one after the other. How much gap should be left between two such sections, so that there is no compression during summer when the maximum temperature rises to 48°C? Coefficient of linear expansion of iron = 11 × 10–6 °C–1.
A circular hole of diameter 2.00 cm is made in an aluminium plate at 0°C. What will be the diameter at 100°C? α for aluminium = 2.3 × 10–5 °C–1.
The densities of wood and benzene at 0°C are 880 kg m3 and 900 kg m–3 , respectively. The coefficients of volume expansion are 1.2 × 10–3 °C–1 for wood and 1.5 × 10–3 °C–1for benzene. At what temperature will a piece of wood just sink in benzene?
Analogy
Evaporation:: 100°C: Freezing:: ______.
What is the dimensional formula of heat?
Which state of matter has particles that vibrate about fixed equilibrium positions?
What is the approximate interatomic spacing in gases at NTP (Normal Temperature and Pressure)?
