Advertisements
Advertisements
प्रश्न
The heat capacity of a body depends on
(a) the heat given
(b) the temperature raised
(c) the mass of the body
(d) the material of the body
Advertisements
उत्तर
(c) the mass of the body
(d) the material of the body
The bigger the body, the larger is its capacity to absorb heat. Therefore, the heat capacity of a body depends on the mass of the body. Also, different bodies have different heat capacities due to their material properties, i.e. due to their molecular structure, the heat capacity of a body depends on the material of the body.
APPEARS IN
संबंधित प्रश्न
Two copper spheres of radii 6 cm and 12 cm respectively are suspended in an evacuated enclosure. Each of them are at a temperature 15°C above the surroundings. The ratio of their rate of loss of heat is.................
- 2:1
- 1:4
- 1:8
- 8:1
A body cools from 62°C to 54°C in 10 minutes and to 48°C in the next 10 minutes. Find the temperature of the surroundings.
A spherical shell is heated. The volume changes according to the equation Vθ = V0 (1 + γθ). Does the volume refer to the volume enclosed by the shell or the volume of the material making up the shell?
If the temperature of a uniform rod is slightly increased by ∆t, its moment of inertia I about a line parallel to itself will increase by
An aluminium sphere is dipped into water at 10°C. If the temperature is increased, the force of buoyancy
A spinning wheel A is brought in contact with another wheel B, initially at rest. Because of the friction at contact, the second wheel also starts spinning. Which of the following energies of the wheel B increases?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
When a solid melts or a liquid boils, the temperature does not increase even when heat is supplied. Where does the energy go?
The atmospheric temperature in the cities on sea-coast change very little. Explain
Two bodies at different temperatures are mixed in a calorimeter. Which of the following quantities remains conserved?
The temperature of an object is observed to rise in a period. In this period
(a) heat is certainly supplied to it
(b) heat is certainly not supplied to it
(c) heat may have been supplied to it
(d) work may have been done on it
Heat and work are equivalent. This means, ____________ .
A railway track (made of iron) is laid in winter when the average temperature is 18°C. The track consists of sections of 12.0 m placed one after the other. How much gap should be left between two such sections, so that there is no compression during summer when the maximum temperature rises to 48°C? Coefficient of linear expansion of iron = 11 × 10–6 °C–1.
A steel wire of cross-sectional area 0.5 mm2 is held between two fixed supports. If the wire is just taut at 20°C, determine the tension when the temperature falls to 0°C. Coefficient of linear expansion of steel is 1.2 × 10–5 °C–1 and its Young's modulus is 2.0 × 10–11 Nm–2.
A steel ball that is initially at a pressure of 1.0 × 105 Pa is heated from 20°C to 120°C, keeping its volume constant.
Find the pressure inside the ball. Coefficient of linear expansion of steel = 12 × 10–6 °C–1and bulk modulus of steel = 1.6 × 1011 Nm–2.
‘An object contains more heat’- is it a right statement? If not why?
Explain the meaning of heat and work with suitable examples.
Temperature and Heat are ______
Heat given to a body that raises its temperature by 1°C is ______.
Near the melting point of a solid, the heat supplied does NOT raise the temperature. Instead, what does it do?
