Advertisements
Advertisements
प्रश्न
When a hot liquid is mixed with a cold liquid, the temperature of the mixture ____________ .
पर्याय
first decreases then becomes constant
first increases then becomes constant
continuously increases
is undefined for some time and then becomes nearly constant
Advertisements
उत्तर
is undefined for some time and then becomes nearly constant
When hot liquid is mixed with cold liquid, the molecules collide and transfer heat. When heat is transferred, the temperature is undefined. Once the heat energy is shared by the molecules, the system reaches equilibrium and the temperature becomes nearly constant.
APPEARS IN
संबंधित प्रश्न
The dimensions of emissive power are ______.
A pinhole is made in a hollow sphere of radius 5 cm whose inner wall is at temperature 727oC. Find the power radiated per unit area. [Stefan’s constant σ = 5.7 x 10-8 J/m2 s K4 , emissivity (e) = 0.2]
Does the temperature of a body depend on the frame from which it is observed?
The length of a brass rod is found to be less on a hot summer day than on a cold winter day as measured by the same aluminium scale. Can we conclude that brass shrinks on heating?
An aluminium sphere is dipped into water at 10°C. If the temperature is increased, the force of buoyancy
The atmospheric temperature in the cities on sea-coast change very little. Explain
Should a thermometer bulb have large heat capacity or small heat capacity?
Which of the following pairs of physical quantities may be represented in the same unit?
If heat is supplied to a solid, its temperature
(a) must increase
(b) may increase
(c) may remain constant
(d) may decrease
A metre scale made of steel is calibrated at 20°C to give correct reading. Find the distance between the 50 cm mark and the 51 cm mark if the scale is used at 10°C. Coefficient of linear expansion of steel is 1.1 × 10–5 °C–1.
A railway track (made of iron) is laid in winter when the average temperature is 18°C. The track consists of sections of 12.0 m placed one after the other. How much gap should be left between two such sections, so that there is no compression during summer when the maximum temperature rises to 48°C? Coefficient of linear expansion of iron = 11 × 10–6 °C–1.
A pendulum clock shows correct time at 20°C at a place where g = 9.800 m s–2. The pendulum consists of a light steel rod connected to a heavy ball. It is taken to a different place where g = 9.788 m s–1. At what temperature will the clock show correct time? Coefficient of linear expansion of steel = 12 × 10–6 °C–1.
The densities of wood and benzene at 0°C are 880 kg m3 and 900 kg m–3 , respectively. The coefficients of volume expansion are 1.2 × 10–3 °C–1 for wood and 1.5 × 10–3 °C–1for benzene. At what temperature will a piece of wood just sink in benzene?
A steel wire of cross-sectional area 0.5 mm2 is held between two fixed supports. If the wire is just taut at 20°C, determine the tension when the temperature falls to 0°C. Coefficient of linear expansion of steel is 1.2 × 10–5 °C–1 and its Young's modulus is 2.0 × 10–11 Nm–2.
Answer the following question.
Clearly, state the difference between heat and temperature?
Two objects are said to be in thermal contact if they can exchange heat energy.
The normal temperature of our body is 37°C.
Give reasons for the following:
Hot metal ball of 80° C is dipped into water of 80°C. The ball will not contract.
What condition defines thermal equilibrium between two bodies?
