Advertisements
Advertisements
प्रश्न
The length of a brass rod is found to be less on a hot summer day than on a cold winter day as measured by the same aluminium scale. Can we conclude that brass shrinks on heating?
Advertisements
उत्तर
On a hot summer day, metals tend to expand due to the heat. Different metals have different expansion coefficients. The coefficient of linear expansion of aluminium is more than that of brass. Therefore, it'll expand more than brass, leading to an apparent decrease in length of the brass rod, as measured by the aluminium scale. So, we cannot conclude that brass shrinks on heating. Instead, aluminium expands more than brass on heating.
APPEARS IN
संबंधित प्रश्न
A metal sphere cools at the rate of 4°C / min. when its temperature is 50°C. Find its rate of cooling at 45°C if the temperature of surroundings is 25°C.
What is the temperature of the triple-point of water on an absolute scale whose unit interval size is equal to that of the Fahrenheit scale?
It is said that mercury is used in defining the temperature scale because it expands uniformly with temperature. If the temperature scale is not yet defined, is it logical to say that a substance expands uniformly with temperature?
Can the bulb of a thermometer be made of an adiabatic wall?
Why do marine animals live deep inside a lake when the surface of the lake freezes?
The density of water at 4°C is supposed to be 1000 kg m–3. Is it same at sea level and at high altitude?
Which of the curves in the following figure represents the relation between Celsius and Fahrenheit temperatures?
The temperature of water at the surface of a deep lake is 2°C. The temperature expected at the bottom is
A spinning wheel is brought in contact with an identical wheel spinning at identical speed. The wheels slow down under the action of friction. Which of the following energies of the first wheel decreases?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
Is heat a conserved quantity?
The mechanical equivalent of heat ____________ .
The heat capacity of a body depends on
(a) the heat given
(b) the temperature raised
(c) the mass of the body
(d) the material of the body
The temperature of a solid object is observed to be constant during a period. In this period
(a) heat may have been supplied to the body
(b) heat may have been extracted from the body
(c) no heat is supplied to the body
(d) no heat is extracted from the body
Heat and work are equivalent. This means, ____________ .
A circular hole of diameter 2.00 cm is made in an aluminium plate at 0°C. What will be the diameter at 100°C? α for aluminium = 2.3 × 10–5 °C–1.
A steel wire of cross-sectional area 0.5 mm2 is held between two fixed supports. If the wire is just taut at 20°C, determine the tension when the temperature falls to 0°C. Coefficient of linear expansion of steel is 1.2 × 10–5 °C–1 and its Young's modulus is 2.0 × 10–11 Nm–2.
Our normal body temperature is ______.
When two bodies at different temperatures are placed in contact, heat flows from ______.
1 calorie is equal to how many joules?
Which of the following correctly differentiates heat from temperature?
