Advertisements
Advertisements
प्रश्न
A steel rod of length 1 m rests on a smooth horizontal base. If it is heated from 0°C to 100°C, what is the longitudinal strain developed?
Advertisements
उत्तर
The steel rod is resting on a horizontal base at 0 °C. When the temperature is increased to 100 °C, it will lead to an increase in the length of the steel due to expansion on heating. Since, there is no opposition in expansion of length, no longitudinal strain will be developed.
APPEARS IN
संबंधित प्रश्न
Two copper spheres of radii 6 cm and 12 cm respectively are suspended in an evacuated enclosure. Each of them are at a temperature 15°C above the surroundings. The ratio of their rate of loss of heat is.................
- 2:1
- 1:4
- 1:8
- 8:1
A pinhole is made in a hollow sphere of radius 5 cm whose inner wall is at temperature 727oC. Find the power radiated per unit area. [Stefan’s constant σ = 5.7 x 10-8 J/m2 s K4 , emissivity (e) = 0.2]
The substance which allows heat radiations to pass through is _______.
(A) iron
(B) water vapour
(C) wood
(D) dry air
A body cools from 80° C to 70° C in 5 minutes and to 62° C in the next 5 minutes. Calculate the temperature of the surroundings.
The density of water at 4°C is supposed to be 1000 kg m–3. Is it same at sea level and at high altitude?
If the temperature of a uniform rod is slightly increased by ∆t, its moment of inertia I about a line parallel to itself will increase by
An aluminium sphere is dipped into water at 10°C. If the temperature is increased, the force of buoyancy
A spinning wheel A is brought in contact with another wheel B, initially at rest. Because of the friction at contact, the second wheel also starts spinning. Which of the following energies of the wheel B increases?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
As the temperature is increased, the time period of a pendulum
When a solid melts or a liquid boils, the temperature does not increase even when heat is supplied. Where does the energy go?
Water equivalent of a body is measured in ___________ .
The mechanical equivalent of heat ____________ .
If heat is supplied to a solid, its temperature
(a) must increase
(b) may increase
(c) may remain constant
(d) may decrease
A metre scale made of steel is calibrated at 20°C to give correct reading. Find the distance between the 50 cm mark and the 51 cm mark if the scale is used at 10°C. Coefficient of linear expansion of steel is 1.1 × 10–5 °C–1.
A circular hole of diameter 2.00 cm is made in an aluminium plate at 0°C. What will be the diameter at 100°C? α for aluminium = 2.3 × 10–5 °C–1.
The normal temperature of our body is 37°C.
What is the SI unit of heat?
What is the dimensional formula of heat?
Which of the following correctly differentiates heat from temperature?
