Advertisements
Advertisements
प्रश्न
A metal ball cools from 64 °C to 50 °C in 10 minutes and to 42 °C in next 10 minutes. The ratio of rates of fall of temperature during the two intervals is _______.
पर्याय
`4/7`
`7/4`
2
2.5
Advertisements
उत्तर
`7/4`
Rate of fall of temperature in first 10 minutes = R1 = `(64 - 50)/10`.°C/min = 1.4°C/min
Rate of fall of temperature in next 10 minutes = R2 = `(50 - 42)/10`.°C/min = 0.8°C/min
⇒ `R_1/R_2 = 7/4`
APPEARS IN
संबंधित प्रश्न
Define emissive power and coefficient of emmision of a body.
The light from the Sun is found to have a maximum intensity near the wavelength of 470 nm. Assuming the surface of the Sun as a black body, the temperature of the Sun is _____________.
[Wien's constant b = 2 .898 x l0- 3mK]
A body cools from 80° C to 70° C in 5 minutes and to 62° C in the next 5 minutes. Calculate the temperature of the surroundings.
Does the temperature of a body depend on the frame from which it is observed?
The density of water at 4°C is supposed to be 1000 kg m–3. Is it same at sea level and at high altitude?
A spinning wheel A is brought in contact with another wheel B, initially at rest. Because of the friction at contact, the second wheel also starts spinning. Which of the following energies of the wheel B increases?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
In a calorimeter, the heat given by the hot object is assumed to be equal to the heat taken by the cold object. Does it mean that heat of the two objects taken together remains constant?
Water equivalent of a body is measured in ___________ .
Which of the following pairs of physical quantities may be represented in the same unit?
Two bodies at different temperatures are mixed in a calorimeter. Which of the following quantities remains conserved?
A pendulum clock shows correct time at 20°C at a place where g = 9.800 m s–2. The pendulum consists of a light steel rod connected to a heavy ball. It is taken to a different place where g = 9.788 m s–1. At what temperature will the clock show correct time? Coefficient of linear expansion of steel = 12 × 10–6 °C–1.
A steel wire of cross-sectional area 0.5 mm2 is held between two fixed supports. If the wire is just taut at 20°C, determine the tension when the temperature falls to 0°C. Coefficient of linear expansion of steel is 1.2 × 10–5 °C–1 and its Young's modulus is 2.0 × 10–11 Nm–2.
A steel ball that is initially at a pressure of 1.0 × 105 Pa is heated from 20°C to 120°C, keeping its volume constant.
Find the pressure inside the ball. Coefficient of linear expansion of steel = 12 × 10–6 °C–1and bulk modulus of steel = 1.6 × 1011 Nm–2.
Define one mole.
Two tumblers of A and B have water at 50°C temperature. If the water from A and B is poured into tumbler C. The temperature of C is ______.
Two objects are said to be in thermal contact if they can exchange heat energy.
Heat is measured in Celsius or centigrade.
The normal temperature of our body is 37°C.
Give reasons for the following:
Hot metal ball of 80° C is dipped into water of 80°C. The ball will not contract.
What is the SI unit of heat?
What is the dimensional formula of heat?
Near the melting point of a solid, the heat supplied does NOT raise the temperature. Instead, what does it do?
What is the approximate interatomic spacing in gases at NTP (Normal Temperature and Pressure)?
The concept of thermal equilibrium, where heat flows between bodies until they reach the same temperature, is the basis of which law of thermodynamics?
