# NCERT solutions for Class 12 Maths chapter 12 - Linear Programming [Latest edition]

#### Chapters ## Solutions for Chapter 12: Linear Programming

Below listed, you can find solutions for Chapter 12 of CBSE, Karnataka Board PUC NCERT for Class 12 Maths.

Exercise 12.1Exercise 12.2Exercise 12.3
Exercise 12.1 [Pages 513 - 514]

### NCERT solutions for Class 12 Maths Chapter 12 Linear Programming Exercise 12.1 [Pages 513 - 514]

Exercise 12.1 | Q 1 | Page 513

Solve the following Linear Programming Problems graphically:

Maximise Z = 3x + 4y
subject to the constraints : x + y ≤ 4, x ≥ 0, y ≥ 0.

Exercise 12.1 | Q 2 | Page 514

Solve the following Linear Programming Problems graphically:

Minimise Z = – 3x + 4 y subject to x + 2y ≤ 8, 3x + 2y ≤ 12, x ≥ 0, y ≥ 0.

Exercise 12.1 | Q 3 | Page 514

Solve the following Linear Programming Problems graphically:

Maximise Z = 5x + 3y subject to 3x + 5y ≤ 15, 5x + 2y ≤ 10, x ≥ 0, y ≥ 0

Exercise 12.1 | Q 4 | Page 514

Solve the following Linear Programming Problems graphically:

Minimise Z = 3x + 5y such that x + 3y ≥ 3, x + y ≥ 2, x, y ≥ 0.

Exercise 12.1 | Q 5 | Page 514

Solve the following Linear Programming Problems graphically:

Maximise Z = 3x + 2y subject to x + 2y ≤ 10, 3x + y ≤ 15, x, y ≥ 0.

Exercise 12.1 | Q 6 | Page 514

Solve the following Linear Programming Problems graphically:

Minimise Z = x + 2y subject to 2x + y ≥ 3, x + 2y ≥ 6, x, y ≥ 0.

Exercise 12.1 | Q 7 | Page 514

Show that the minimum of Z occurs at more than two points.

Minimise and Maximise Z = 5x + 10 y subject to x + 2y ≤ 120, x + y ≥ 60, x – 2y ≥ 0, x, y ≥ 0.

Exercise 12.1 | Q 8 | Page 514

Show that the minimum of Z occurs at more than two points

Minimise and Maximise Z = x + 2y subject to x + 2y ≥ 100, 2x – y ≤ 0, 2x + y ≤ 200; x, y ≥ 0.

Exercise 12.1 | Q 9 | Page 514

Show that the minimum of Z occurs at more than two points

Maximise Z = – x + 2y, subject to the constraints x ≥ 3, x + y ≥ 5, x + 2y ≥ 6, y ≥ 0.

Exercise 12.1 | Q 10 | Page 514

Show that the minimum of Z occurs at more than two points.

Maximise Z = x + y, subject to x – y ≤ –1, –x + y ≤ 0, x, y ≥ 0.

Exercise 12.2 [Pages 525 - 520]

### NCERT solutions for Class 12 Maths Chapter 12 Linear Programming Exercise 12.2 [Pages 525 - 520]

Exercise 12.2 | Q 1 | Page 525

Refer to Example 9. How many packets of each food should be used to maximize the amount of vitamin A in the diet? What is the maximum amount of vitamin A in the diet?

Exercise 12.2 | Q 1 | Page 519

Reshma wishes to mix two types of food P and Q in such a way that the vitamin contents of the mixture contain at least 8 units of vitamin A and 11 units of vitamin B. Food P costs Rs 60/kg and Food Q costs Rs 80/kg. Food P contains 3 units /kg of vitamin A and 5 units /kg of vitamin B while food Q contains 4 units /kg of vitamin A and 2 units /kg of vitamin B. Determine the minimum cost of the mixture?

Exercise 12.2 | Q 2 | Page 519

One kind of cake requires 200g flour and 25g of fat, and another kind of cake requires 100g of flour and 50g of fat. Find the maximum number of cakes which can be made from 5 kg of flour and 1 kg of fat assuming that there is no shortage of the other ingredients used in making the cakes?

Exercise 12.2 | Q 2 | Page 526

A farmer mixes two brands P and Q of cattle feed. Brand P, costing Rs 250 per bag contains 3 units of nutritional element A, 2.5 units of element B and 2 units of element C. Brand Q costing Rs 200 per bag contains 1.5 units of nutritional elements A, 11.25 units of element B, and 3 units of element C. The minimum requirements of nutrients A, B and C are 18 units, 45 units and 24 units respectively. Determine the number of bags of each brand which should be mixed in order to produce a mixture having a minimum cost per bag? What is the minimum cost of the mixture per bag?

Exercise 12.2 | Q 3 | Page 519

A factory makes tennis rackets and cricket bats. A tennis racket takes 1.5 hours of machine time and 3 hours of craftsman’s time in its making while a cricket bat takes 3 hour of machine time and 1 hour of craftsman’s time. In a day, the factory has the availability of not more than 42 hours of machine time and 24 hours of craftsman’s time.

If the profit on a racket and on a bat is Rs 20 and Rs 10 respectively, find the maximum profit of the factory when it works at full capacity.

Exercise 12.2 | Q 3.1 | Page 519

A factory makes tennis rackets and cricket bats. A tennis racket takes 1.5 hours of machine time and 3 hours of craftsman’s time in its making while a cricket bat takes 3 hour of machine time and 1 hour of craftsman’s time. In a day, the factory has the availability of not more than 42 hours of machine time and 24 hours of craftsman’s time.

What number of rackets and bats must be made if the factory is to work at full capacity?

Exercise 12.2 | Q 4 | Page 519

A manufacturer produces nuts ad bolts. It takes 1 hour of work on machine A and 3 hours on machine B to produce a package of nuts. It takes 3 hours on machine A and 1 hour on machine B to produce a package of bolts. He earns a profit, of Rs 17.50 per package on nuts and Rs. 7.00 per package on bolts. How many packages of each should be produced each day so as to maximize his profit, if he operates his machines for at the most 12 hours a day?

Exercise 12.2 | Q 5 | Page 519

A factory manufactures two types of screws, A and B. Each type of screw requires the use of two machines, an automatic and a hand operated. It takes 4 minutes on the automatic and 6 minutes on hand operated machines to manufacture a package of screws A, while it takes 6 minutes on automatic and 3 minutes on the hand operated machines to manufacture a package of screws B. Each machine is available for at the most 4 hours on any day. The manufacturer can sell a package of screws A at a profit of Rs 7 and screws B at a profit of Rs10. Assuming that he can sell all the screws he manufactures, how many packages of each type should the factory owner produce in a day in order to maximize his profit? Determine the maximum profit.

Exercise 12.2 | Q 6 | Page 520

A cottage industry manufactures pedestal lamps and wooden shades, each requiring the use of a grinding/cutting machine and a sprayer. It takes 2 hours on grinding/cutting machine and 3 hours on the sprayer to manufacture a pedestal lamp. It takes 1 hour on the grinding/cutting machine and 2 hours on the sprayer to manufacture a shade. On any day, the sprayer is available for at the most 20 hours and the grinding/cutting machine for at the most 12 hours. The profit from the sale of a lamp is Rs 5 and that from a shade is Rs 3. Assuming that the manufacturer can sell all the lamps and shades that he produces, how should he schedule his daily production in order to maximize his profit?

Exercise 12.2 | Q 7 | Page 520

A company manufactures two types of novelty souvenirs made of plywood. Souvenirs of type A require 5 minutes each for cutting and 10 minutes each for assembling. Souvenirs of type B require 8 minutes each for cutting and 8 minutes each for assembling. There are 3 hours 20 minutes available for cutting and 4 hours of assembling. The profit is Rs 5 each for type A and Rs 6 each for type B souvenirs. How many souvenirs of each type should the company manufacture in order to maximize the profit?

Exercise 12.2 | Q 8 | Page 520

A merchant plans to sell two types of personal computers − a desktop model and a portable model that will cost Rs 25000 and Rs 40000 respectively. He estimates that the total monthly demand of computers will not exceed 250 units. Determine the number of units of each type of computers which the merchant should stock to get maximum profit if he does not want to invest more than Rs 70 lakhs and if his profit on the desktop model is Rs 4500 and on portable model is Rs 5000.

Exercise 12.2 | Q 9 | Page 520

A diet is to contain at least 80 units of vitamin A and 100 units of minerals. Two foods F1and F2are available. Food F1 costs Rs 4 per unit food and F2 costs Rs 6 per unit. One unit of food F1contains 3 units of vitamin A and 4 units of minerals. One unit of food F2 contains 6 units of vitamin A and 3 units of minerals. Formulate this as a linear programming problem. Find the minimum cost for diet that consists of mixture of these two foods and also meets the minimal nutritional requirements?

Exercise 12.2 | Q 10 | Page 520

There are two types of fertilizers F1 and F2. F1 consists of 10% nitrogen and 6% phosphoric acid and F2 consists of 5% nitrogen and 10% phosphoric acid. After testing the soil conditions, a farmer finds that she needs at least 14 kg of nitrogen and 14 kg of phosphoric acid for her crop. If F1 cost Rs 6/kg and F2 costs Rs 5/kg, determine how much of each type of fertilizer should be used so that nutrient requirements are met at a minimum cost. What is the minimum cost?

Exercise 12.2 | Q 11 | Page 520

The corner points of the feasible region determined by the following system of linear inequalities:

2x + y ≤ 10, x + 3y ≤ 15, x, y ≥ 0 are (0, 0), (5, 0), (3, 4) and (0, 5). Let Z = px + qy, where p, q > 0. Condition on p and q so that the maximum of Z occurs at both (3, 4) and (0, 5) is

(A) p = q

(B) p = 2q

(C) p = 3q

(D) q = 3p

Exercise 12.3 [Pages 526 - 582]

### NCERT solutions for Class 12 Maths Chapter 12 Linear Programming Exercise 12.3 [Pages 526 - 582]

Exercise 12.3 | Q 3 | Page 526

A dietician wishes to mix together two kinds of food X and Y in such a way that the mixture contains at least 10 units of vitamin A, 12 units of vitamin B and 8 units of vitamin C. The vitamin content of one kg food is given below:

 Food Vitamin A Vitamin B Vitamin C X 1 2 3 Y 2 2 1

One kg of food X costs Rs 16 and one kg of food Y costs Rs 20. Find the least cost of the mixture which will produce the required diet?

Exercise 12.3 | Q 4 | Page 526

A manufacturer makes two types of toys A and B. Three machines are needed for this purpose and the time (in minutes) required for each toy on the machines is given below:

 Type of toy Machines I II III A 12 18 6 B 6 0 9

Each machine is available for a maximum of 6 hours per day. If the profit on each toy of type A is Rs 7.50 and that on each toy of type B is Rs 5, show that 15 toys of type A and 30 of type B should be manufactured in a day to get maximum profit.

Exercise 12.3 | Q 5 | Page 526

An aeroplane can carry a maximum of 200 passengers. A profit of Rs 1000 is made on each executive class ticket and a profit of Rs 600 is made on each economy class ticket. The airline reserves at least 20 seats for executive class. However, at least 4 times as many passengers prefer to travel by economy class than by the executive class. Determine how many tickets of each type must be sold in order to maximize the profit for the airline. What is the maximum profit?

Exercise 12.3 | Q 6 | Page 527

Two godowns A and B have grain capacity of 100 quintals and 50 quintals respectively. They supply to 3 ration shops, D, E and F whose requirements are 60, 50 and 40 quintals respectively. The cost of transportation per quintal from the godowns to the shops are given in the following table:

 Transportation cost per quintal (in Rs) From/To A B D 6 4 E 3 2 F 2.50 3

How should the supplies be transported in order that the transportation cost is minimum? What is the minimum cost?

Exercise 12.3 | Q 7 | Page 527

An oil company has two depots A and B with capacities of 7000 L and 4000 L respectively. The company is to supply oil to three petrol pumps, D, E and F whose requirements are 4500L, 3000L and 3500L respectively. The distance (in km) between the depots and the petrol pumps is given in the following table:

 Distance in (km) From/To A B D 7 3 E 6 4 F 3 2

Assuming that the transportation cost of 10 litres of oil is Re 1 per km, how should the delivery be scheduled in order that the transportation cost is minimum? What is the minimum cost?

Exercise 12.3 | Q 8 | Page 527

A fruit grower can use two types of fertilizer in his garden, brand P and brand Q. The amounts (in kg) of nitrogen, phosphoric acid, potash, and chlorine in a bag of each brand are given in the table. Tests indicate that the garden needs at least 240 kg of phosphoric acid at least 270 kg of potash and at most 310 kg of chlorine.

If the grower wants to minimize the amount of nitrogen added to the garden, how many bags of each brand should be used? What is the minimum amount of nitrogen added in the garden?

 kg per bag Brand P Brand Q Nitrogen 3 3.5 Phosphoric acid 1 2 Potash 3 1.5 Chlorine 1.5 2
Exercise 12.3 | Q 9 | Page 528

Refer to question 8. If the grower wants to maximize the amount of nitrogen added to the garden, how many bags of each brand should be added? What is the maximum amount of nitrogen added?

Exercise 12.3 | Q 10 | Page 582

A toy company manufactures two types of dolls, A and B. Market tests and available resources have indicated that the combined production level should not exceed 1200 dolls per week and the demand for dolls of type B is at most half of that for dolls of type A. Further, the production level of dolls of type A can exceed three times the production of dolls of other type by at most 600 units. If the company makes profit of Rs 12 and Rs 16 per doll respectively on dolls A and B, how many of each should be produced weekly in order to maximize the profit?

## Solutions for Chapter 12: Linear Programming

Exercise 12.1Exercise 12.2Exercise 12.3 ## NCERT solutions for Class 12 Maths chapter 12 - Linear Programming

Shaalaa.com has the CBSE, Karnataka Board PUC Mathematics Class 12 Maths CBSE, Karnataka Board PUC solutions in a manner that help students grasp basic concepts better and faster. The detailed, step-by-step solutions will help you understand the concepts better and clarify any confusion. NCERT solutions for Mathematics Class 12 Maths CBSE, Karnataka Board PUC 12 (Linear Programming) include all questions with answers and detailed explanations. This will clear students' doubts about questions and improve their application skills while preparing for board exams.

Further, we at Shaalaa.com provide such solutions so students can prepare for written exams. NCERT textbook solutions can be a core help for self-study and provide excellent self-help guidance for students.

Concepts covered in Class 12 Maths chapter 12 Linear Programming are Introduction of Linear Programming, Mathematical Formulation of Linear Programming Problem, Different Types of Linear Programming Problems, Graphical Method of Solving Linear Programming Problems, Linear Programming Problem and Its Mathematical Formulation.

Using NCERT Class 12 Maths solutions Linear Programming exercise by students is an easy way to prepare for the exams, as they involve solutions arranged chapter-wise and also page-wise. The questions involved in NCERT Solutions are essential questions that can be asked in the final exam. Maximum CBSE, Karnataka Board PUC Class 12 Maths students prefer NCERT Textbook Solutions to score more in exams.

Get the free view of Chapter 12, Linear Programming Class 12 Maths additional questions for Mathematics Class 12 Maths CBSE, Karnataka Board PUC, and you can use Shaalaa.com to keep it handy for your exam preparation.