Advertisements
Advertisements
Question
In a horizontal pipe of non-uniform cross-section, water flows with a velocity of 1 ms−1 at a point where the diameter of the pipe is 20 cm. The velocity of water (1.5 ms−1) at a point where the diameter of the pipe is (in cm)
Options
8
16
24
32
Advertisements
Solution
16
APPEARS IN
RELATED QUESTIONS
Write down the expression for Stoke’s force and explain the symbols involved in it.
Why two holes are made to empty an oil tin?
A small metal sphere of mass M and density d1, when dropped in a jar filled with liquid moves with terminal velocity after sometime. The viscous force acting on the sphere is (d2 = density of liquid and g = gravitational acceleration)
In motors, more viscous oil is used in summer than in winter due to ____________.
Analogy
Viscous force: ______:: Buoyant force: ______.
The coefficient of apparent expansion of mercury in a glass vessel is 153 × 10-6/°C and in a steel vessel is 144 × 10-6/°C. If α for steel is 12 × 10-6/°C, then that of glass is ______.
A liquid of density ρ and coefficient of viscosity η flows with velocity v through a tube of diameter D. A quantity `"R" = (rho"vD")/η`, determines whether the flow will be streamlined or turbulent. R has the dimension of ______.
State the formula and S.I. units of coefficient of viscosity.
An incompressible liquid is flowing through a uniform cross-sectional tube with a velocity 12 cm/ s. If the thickness of liquid layer is 0.8 cm, what is the velocity gradient of that flow of liquid?
A force of 0.01 N is required to move a flat glass plate of area of 10 cm2 with a uniform velocity of 1 cm/ s over the surface of a liquid 2 mm thick. If the coefficient of viscosity of the liquid is 20 poise, the velocity gradient in the liquid layer is ______.
