मराठी

Write down an expression for the resistance of a metallic wire in terms of the resistivity.

Advertisements
Advertisements

प्रश्न

Write down an expression for the resistance of a metallic wire in terms of the resistivity.

Advertisements

उत्तर

 Length of the cable wire = l 

Area of cross-section = A
Resistivity of the aluminium cable wire = `rho` 
 
Resistance of the wire = R

Then,  `R=l/A` 

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 4: Electricity - Exercise 4

APPEARS IN

लखमीर सिंह Physics [English] Class 10
पाठ 4 Electricity
Exercise 4 | Q 15.1

संबंधित प्रश्‍न

Find the expression for resistors connected in series.


When a 4 Ω resistor is connected across the terminals of a 12 V battery, the number of coulombs passing through the resistor per second is:

(a) 0.3
(b) 3
(c) 4
(d) 12


Name the material which is the best conductor of electricity.


How does the presence of impurities in a metal affect its resistance?


A p.d. of 4 V is applied to two resistors of 6 Ω and 2 Ω connected in series. Calculate:

(a) the combined resistance
(b) the current flowing
(c) the p.d. across the 6 Ω resistor


If two resistors of 25 Ω and 15 Ω are joined together in series and then placed in parallel with a 40 Ω resistor, the effective resistance of the combination is : 

(a) 0.1 Ω
(b) 10 Ω
(c) 20 Ω
(d)40 Ω


The diagram below shows part of a circuit: 

 

If this arrangement of three resistors was to be replaced by a single resistor, its resistance should be:
 
(a) 9 Ω
(b) 4 Ω
(c) 6 Ω
(d) 18 Ω


You are supplied with a number of 100 Ω resistors. How could you combine some of these resistors to make a 250 Ω resistor?


Name the physical quantity that represents the ratio of potential difference and current.

Does a voltmeter have a low or high resistance?

What is the value of a resistance if 20 V drives 2 A through it?

What is the equivalent resistance between A and B in the given circuit (Fig?)


Three resistors of 6.0 Ω, 2.0 Ω and 4.0 Ω are joined to an ammeter A and a cell of emf 6.0 V as shown in the following figure. Calculate :

  1. the effective resistance of the circuit.
  2. the reading of ammeter.


To increase the effective resistance in a circuit, the resistors are connected in _______________ .


When do you say that the resistors are connected in this way? Draw a circuit diagram.


What material is used for making wire to prepare heating coils? Give a reason.


State expression for Resistance connected in parallel.


State expression for Cells connected in parallel.


A metal wire of resistance 6 Ω is stretched so that its length is increased to twice its original length. Calculate its new resistance.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×